Abstract:In this work, the non-uniform corrosion characteristics of steel bars in stressed reinforced concrete beams after accelerated depassivation and seven-year outdoor natural corrosion is analyzed using fractal theory. 3D laser scanning and 3D reconstruction technology are applied to collect the cross-sectional area along the steel bars and obtain the corrosion curves. The non-uniformity of corrosion is analyzed by fractal dimensions which is calculated by variation method. The results indicate that the initial loading level and loading zone have some influence on non-uniform characteristics of steel bars. For an ordinary concrete beam, the increase of load can cause a reduction of fractal dimension of corrosion curves by 5%, which indicates the non-uniformity of corrosion will increase with the increase of load level. The fractal dimension in the bending zone is lower than that in the tension-shear zone, which indicates that corrosion is more non-uniform in bending zone. However, the loading level and loading zone have a slight influence on corrosion level, and the maximum difference of corrosion level caused by load is merely 0.23%. Furthermore, the corrosion level increases with the decrease of fractal dimension, suggesting that the non-uniformity of corrosion increases with the growth of corrosion level. The incorporation of slag powder can help reduce the non-uniformity of corrosion, but the influence on reduction of the corrosion level is about 0.25%. For concrete structures under marine environment, application of slag powder is a good method to slow down the corrosion and reduce the non-uniformity of corrosion.

Non-Uniform Distribution of A Corrosion Layer at A Steel/Concrete Interface Described by A Gaussian Model

Applicability Discussion for Multi-Peak Gaussian Model of Corrosion Layer at Steel/concrete Interfaces

Non-uniform distribution of rust layer around steel bar in concrete

Comparison of Uniform and Non-Uniform Corrosion Induced Damage in Reinforced Concrete Based on a Gaussian Description of the Corrosion Layer

State-of-art of corrosion-induced cracking of reinforced concrete structures

Distribution of millscale on corroded steel bars and penetration of steel corrosion products in concrete

Study On Distribution Of Steel Corrosion Products In Concrete Structures

Fractal Characterization of Non-Uniform Corrosion of Steel Bars in Concrete Beams after Accelerated Depassivation and Seven-Year Natural Corrosion.

Mill Scale and Corrosion Layer at Concrete Surface Cracking

Study on Experimental Method and Morphology of Accelerated Non-Uniform Corrosion of Steel Bars

Critical thickness of rust layer at inner and out surface cracking of concrete cover in reinforced concrete structures

Rust Distribution And Corrosion-Induced Cracking Patterns Of Corner Located Rebar In Concrete Cover

Modelling the corrosion mechanism of steel bars in chloride-contaminated concrete with transverse cracks

Corrosion-induced concrete cracking model considering corrosion product-filled paste at the concrete/steel interface

Numerical Simulation of Steel Corrosion in Chloride Contaminated Concrete

A Self-Balanced Electrochemical Model for Corrosion of Reinforcing Steel Bar in Considering the Micro-Environments in Concrete

Modeling the Amount of Steel Corrosion at the Cracking of Concrete Cover

Stochastic Characteristics of Reinforcement Corrosion in Concrete Beams under Sustained Loads

Analysis on steel corrosion at the cracking of concrete

On the Penetration of Corrosion Products from Reinforcing Steel into Concrete Due to Chloride-Induced Corrosion

Influence of Environment on the Development of Corrosion Product-Filled Paste and a Corrosion Layer at the Steel/concrete Interface