Abstract:In this work, the non-uniform corrosion characteristics of steel bars in stressed reinforced concrete beams after accelerated depassivation and seven-year outdoor natural corrosion is analyzed using fractal theory. 3D laser scanning and 3D reconstruction technology are applied to collect the cross-sectional area along the steel bars and obtain the corrosion curves. The non-uniformity of corrosion is analyzed by fractal dimensions which is calculated by variation method. The results indicate that the initial loading level and loading zone have some influence on non-uniform characteristics of steel bars. For an ordinary concrete beam, the increase of load can cause a reduction of fractal dimension of corrosion curves by 5%, which indicates the non-uniformity of corrosion will increase with the increase of load level. The fractal dimension in the bending zone is lower than that in the tension-shear zone, which indicates that corrosion is more non-uniform in bending zone. However, the loading level and loading zone have a slight influence on corrosion level, and the maximum difference of corrosion level caused by load is merely 0.23%. Furthermore, the corrosion level increases with the decrease of fractal dimension, suggesting that the non-uniformity of corrosion increases with the growth of corrosion level. The incorporation of slag powder can help reduce the non-uniformity of corrosion, but the influence on reduction of the corrosion level is about 0.25%. For concrete structures under marine environment, application of slag powder is a good method to slow down the corrosion and reduce the non-uniformity of corrosion.

Fractal Characterization of Non-Uniform Corrosion of Steel Bars in Concrete Beams after Accelerated Depassivation and Seven-Year Natural Corrosion.

Effect Of Corroded Surface Morphology On Ultra-Low Cycle Fatigue Of Steel Bridge Piers

Ultra-low Cycle Fatigue Properties and Fracture Mechanism of Corroded Structural Steel

Study on Experimental Method and Morphology of Accelerated Non-Uniform Corrosion of Steel Bars

Developing a Three-Dimensional Finite Element Analysis Approach to Simulate Corrosion-Induced Concrete Cracking in Reinforced Concrete Beams

Prediction of Corrosion-Induced Concrete Cracking under External Loading and Stirrup Constraint

Stochastic Characteristics of Reinforcement Corrosion in Concrete Beams under Sustained Loads

Corrosion Characteristics of A 4-Year Naturally Corroded Reinforced Concrete Beam with Load-Induced Transverse Cracks

Fractal Characteristics of Corrosion-Induced Cracks in Reinforced Concrete.

Modelling the corrosion mechanism of steel bars in chloride-contaminated concrete with transverse cracks

Monotonic and fatigue behavior of steel-concrete composite beams subjected to corrosion

Crack shape and rust distribution in corrosion-induced cracking concrete coupled with load

Study On Distribution Of Steel Corrosion Products In Concrete Structures

Crack Propagation and Flexural Behaviour of Rc Beams under Simultaneous Sustained Loading and Steel Corrosion

Analysis on steel corrosion at the cracking of concrete

Mechanical Performance of Corroded Steel Bars in Concrete

Corrosion Development of Carbon Steel Grids and Shear Connectors in Cracked Composite Beams Exposed to Wet-Dry Cycles in Chloride Environment.

Corrosion-induced Shear Performance Degradation of Reinforced Concrete Beams

Distribution of millscale on corroded steel bars and penetration of steel corrosion products in concrete

Effect of Chloride-Induced Reinforcing Steel Corrosion on the Flexural Strength of Reinforced Concrete Beams

Non-Uniform Distribution of A Corrosion Layer at A Steel/Concrete Interface Described by A Gaussian Model