Abstract:Abstract Super-hydrophobic materials have broad application prospects in industry, agriculture and daily life. Not only the types of the materials but also the structure and the morphology of their surface have a significant impact on the hydrophobicity of materials. In this study, nano-structured TiO2 coatings were deposited on glass surface by vacuum cold spray using agglomerated nano-TiO2 powder and aggregated nanostructured TiO2 powder to create nanostructured and micro-nano hierarchical structured TiO2 surface. The surface morphology of nanostructured TiO2 deposited surface was characterized by scanning electron microscopy and 3D laser microscopy. The influences of the surface morphology, annealing and fluoroalkylsilane adsorption treatment on the wettability of the surfaces were investigated. The results showed that the nanostructured TiO2 coatings in the as-sprayed and annealed states were hydrophilic. However, after adsorbing treatment by fluoroalkylsilane, the nanostructured TiO2 deposited glass surface exhibited super-hydrophobicity. The contact angle of water drops on TiO2 coating surfaces became greater than 120° up to 170° depending on the local surface morphology. Moreover, micro-nano hierarchical structured TiO2 coatings obtained by VCS using aggregated nano-TiO2 after fluoroalkylsilane adsorption exhibited excellent super-hydrophobic performance and the contact angle was greater than 170° and water droplets tended to roll on the surface with extremely low adhesion.

Study on the Surface Modification of Slurry and Powder of Nano-Caco3 Synthesized by Supergravity Reaction- Crystallization Method

The Mechanical and NIR Studies on Ultrafine Calcium Carbonate Treated by Four Surface Modifiers.

Minicrystal And Xps Analysis Of Sio2 Coated Superfine Caco3 Powder

Mechanism and surface characteristics of polyacrylic acid-coated ultra-fine CaCO3

Surface Modification and Adsorption Mechanism of Nanometer CaCO3

Surface coating of anhydrite powders with CaCO3 nano-particles prepared in Ca(OH)2-H2O-CO2 system

Surface Modification of CaCO3 by Ultrasound-Assisted Titanate and Silane Coupling Agents

Surface Modification of Nano-calcium Carbonate by Composite Modifier

Fabrication of Superhydrophobic Surfaces Via Caco3 Mineralization Mediated by Poly(Glutamic Acid)

Preparation and In-Situ Surface Modification of CaCO3 Nanoparticles with Calcium Stearate in a Microreaction System

Study on preparation and surface modification of precipitated silica obtained from fly ash

Surface Modification Of Nano-Sic Powders By Coating With Heterogeneous Nucleation Process

In Situ Preparation of Hydrophobic CaCO3 Nanoparticles in a Gas–liquid Microdispersion Process

Combined Effect of Ion Concentration and Functional Groups on Surface Chemistry Modulated CaCO3 Crystallization

Preparation of composite wollastonite powder with nano structure surface

Surface modification of superfine SiC powders by ternary modifiers-KH560/sodium humate/SDS and its mechanism

Preparation and Characterization of Super-Hydrophobic Surface Through Particle Deposition by Vacuum Cold Spray

Study on influence mechanism of surface active agent in preparing nano-sized zirconia powders by super-alkaline coprecipitation method

Study on the Modification of Superfine Amorphous Silica by Liquid-phase Precipitation Method

Study on the Surface Modification of Ultra-fine AlN Powders

Study on Surface Modification of Nano-Calcium Carbonate in Ethanol and Its In-situ Composite