Abstract:The effect of surface-active substances (surfactants) on the state of water in clay was studied based on the data of swelling and sedimentation of clay particles in aqueous suspensions. The features of the influence of three types of additives-technical lignosulfonate and hyperplasticizers manufactured by Arkema and Movecreate are considered. When surfactant solutions are introduced into the clay system, an increase in the wettability of clay particles is observed, which promotes the adsorption of surfactant molecules on the surface of the dispersed phase, which depends on the structure of clay minerals and their impurities. Surfactants simultaneously have a plasticizing and structuring effect on the clay mass, leading to intensification of drying in the initial stages and, consequently, to a decrease in shrinkage deformations. The most effective additive is lignosulfonate, the introduction of which in an amount of 0.01 % in a clay suspension increases the fluidity of the suspension, and the mobility of water decreases by more than 3 times than in the presence of hyperplasticizers. The best preservation of the suspension is also ensured in the presence of a plasticizer-lignosulfonate. The main difference in the action of polycarboxylates and lignosulfonate is to change the sedimentation rate of clay suspensions. Modification of clay loam by surfactants leads to improved drying properties, quantified in a decrease in sensitivity to drying.

Study on the Modification of Superfine Amorphous Silica by Liquid-phase Precipitation Method

Study on preparation and surface modification of precipitated silica obtained from fly ash

The processing and performance of well-distributed silica

Organize modification of silica sol and its application in adhesives

Modification and characterization of superfine amorphous silica with macromolecule waxen emulsion

Preparation of Silica Flatting Agent with Large Pore Volume by Using a Micro-sieve Reactor

Preparation of highly dispersed nanosilica from rice husk by aprecipitation method combined with high pressure homogenization

Amorphous Silica: prepared by byproduct microsilica in the ferrosilicon production and applied in amorphous silica-TiO 2 composite with favorable pigment properties

Preparation of Silica Material with High Pore Volume by Precipitation in Membrane Dispersion Reactor

Effects of Surfactants on the Synthesis of Silica Aerogels Prepared by Ambient Pressure Drying

Modification Of Nano-Fibriform Silica By Dimethyldichlorosilane

The preparation of silica white from fly ash and its characterization

Modification of Nanosilica Particles with Hydrophobic Modifier Bis[3-(Triethoxysilyl)propyl]tetrasulfide by Using Micro-Injection in Aqueous Solutions

Preparation of Highly Dispersed Precipitated Nanosilica in a Membrane Dispersion Microreactor

Effects of Precipitation and Drying Processes on the Synthesis of Silica Materials with A Large-Pore-Volume and Narrow-Pore-Diameter Distribution

Modification of clay raw materials to optimize slip casting

Preparation of Silica for Rubber

Statistical Approaching for Superhydrophobic Coating Preparation using Silica Derived from Geothermal Solid Waste

Study on Effect to Diameter of Porous Silica Particles Prepared from Wollastonite

Study on Modification and Dispersion of Nano‐silica

Influence of Silane Coupling Agent and Anionic Dispersant on the Dispersion Effect of Silicon Carbide Particles