Abstract:The particle size and pore size of spherical mesoporous silica materials play significant roles in their application. However, relatively limited systematic research has been conducted on how preparation conditions influence these properties. In particular, the effects of some important factors have not been adequately studied, including reaction time, reaction temperature, and organic solvent type. In this work, octane and water were used as solvents, and tetraethyl orthosilicate was used as the silicon source to systematically study the effects of reaction time, reaction temperature, different organic solvents, octane/water mass ratio, styrene template concentration, and surfactant (cetyltrimethylammonium bromide, CTAB)/H2O mass ratio on the particle morphology, particle size, and pore size of silica. The results suggest that the above-mentioned neglected factors exert a substantial influence on both particle size and pore size. In the experimental temperature range, the pore diameter decreases and the particle size increases with increasing temperature. The maximum particle size and pore size are achieved after a reaction time of 3 h, and a further increase in reaction time leads to a smaller particle size and pore size. As the number of carbon atoms in the organic solvent decreases, the pore size also gradually increases. Styrene and organic solvents that dissolve in CTAB micelles are crucial factors in pore formation, while the aggregation of the swollen CTAB micelles influences the particle size. The changes in the pore structure stability and hydroxyl density of the synthesized samples in water were also studied. After undergoing water treatment at temperatures ranging from 20 to 60 °C for 72 h, both the pore structure and morphology remain relatively unchanged. When the temperature increases, the surface hydroxyl density exhibits a more pronounced increase in the presence of water. After water treatment for 5 h, the surface hydroxyl density reaches saturation.

Study on Effect to Diameter of Porous Silica Particles Prepared from Wollastonite

Study on Effect of Porous Silica Prepared from Wollastonite As Reinforcer in Silastic

Study on Technology of Combining High Specific Surface Area Silica from Wollastonite

EFFECT OF LONG CHAIN CATIONIC SURFACTANT ON ZSM-5 SYNTHESIS AND METHANOL TO OLEFIN REACTION

Effects of synthesis conditions on particle size and pore size of spherical mesoporous silica

Effects of porogen EDTA on morphology of porous silica support and preparation of MFI zeolite membrane

Study on the Modification of Superfine Amorphous Silica by Liquid-phase Precipitation Method

Enhanced Biphasic Reactions in Amphiphilic Silica Mesopores

Preparation of highly dispersed nanosilica from rice husk by aprecipitation method combined with high pressure homogenization

Effects of Precipitation and Drying Processes on the Synthesis of Silica Materials with A Large-Pore-Volume and Narrow-Pore-Diameter Distribution

The Effect of SiO2 Addition on Phase and Microstructure of Porous Silica Ceramic

Study on the regulation mechanism of tunable characteristics of porous silica microspheres synthesized via micelle templating method

Study on Preparation of Silica Sol by Silicon Dissolution & Dripping water glass Method

Preparation of Silica Material with High Pore Volume by Precipitation in Membrane Dispersion Reactor

The processing and performance of well-distributed silica

Preparation of Silica Flatting Agent with Large Pore Volume by Using a Micro-sieve Reactor

Influence of different pore-forming agents on wollastonite microstructures and adsorption capacities

Monodispersed, Micron-Sized Supermicroporous Silica Particles by Cetyltrimethylammonium Bromide-Mediated Preparation

Effect of Surfactant Concentration on the Physico-chemical Characteristics of Mesoporous Molecular Sieve

Preparation of silica microspheres by hydrolysis of silicon tetrachloride in microemulsion

Effect of Different Particle Sizes and Pore-Making Agent Ratio on Properties of SiC Porous Ceramics