Abstract:The particle size and pore size of spherical mesoporous silica materials play significant roles in their application. However, relatively limited systematic research has been conducted on how preparation conditions influence these properties. In particular, the effects of some important factors have not been adequately studied, including reaction time, reaction temperature, and organic solvent type. In this work, octane and water were used as solvents, and tetraethyl orthosilicate was used as the silicon source to systematically study the effects of reaction time, reaction temperature, different organic solvents, octane/water mass ratio, styrene template concentration, and surfactant (cetyltrimethylammonium bromide, CTAB)/H2O mass ratio on the particle morphology, particle size, and pore size of silica. The results suggest that the above-mentioned neglected factors exert a substantial influence on both particle size and pore size. In the experimental temperature range, the pore diameter decreases and the particle size increases with increasing temperature. The maximum particle size and pore size are achieved after a reaction time of 3 h, and a further increase in reaction time leads to a smaller particle size and pore size. As the number of carbon atoms in the organic solvent decreases, the pore size also gradually increases. Styrene and organic solvents that dissolve in CTAB micelles are crucial factors in pore formation, while the aggregation of the swollen CTAB micelles influences the particle size. The changes in the pore structure stability and hydroxyl density of the synthesized samples in water were also studied. After undergoing water treatment at temperatures ranging from 20 to 60 °C for 72 h, both the pore structure and morphology remain relatively unchanged. When the temperature increases, the surface hydroxyl density exhibits a more pronounced increase in the presence of water. After water treatment for 5 h, the surface hydroxyl density reaches saturation.

Effects of Precipitation and Drying Processes on the Synthesis of Silica Materials with A Large-Pore-Volume and Narrow-Pore-Diameter Distribution

Preparation of Silica Material with High Pore Volume by Precipitation in Membrane Dispersion Reactor

Preparation of Silica Flatting Agent with Large Pore Volume by Using a Micro-sieve Reactor

Preparation of Highly Dispersed Precipitated Nanosilica in a Membrane Dispersion Microreactor

Preparation of highly dispersed nanosilica from rice husk by aprecipitation method combined with high pressure homogenization

Preparation of Silica Aerogels Via Non-supercritical Drying and Their Formation Process

A comparative study of drying techniques on the morphology of porous silica gels synthesized via sol-gel process

Preparation of Silica Aerogels by Non-Supercritical Drying

A Pressurized Carbonation Sol–gel Process for Preparing Large Pore Volume Silica and Its Performance As a Flatting Agent and an Adsorbent

Preparation of Nano-Sized Mesoporous Silica Dioxide and Al-Doped Silica Dioxide at Extremely Low Reactant Concentration

Effects of synthesis conditions on particle size and pore size of spherical mesoporous silica

A One-Step Ultrasonic Spray Pyrolysis Approach to Large-Scale Synthesis of Silica Microspheres

Preparation of Monodisperse Silica Mesoporous Microspheres with Narrow Pore Size Distribution

Preparation of porous SiO2 with high specific surface area by sodium silicate

Large-scale Preparation of Macro-Porous Silica Microspheres Via Sol–gel Composite Particles and a Spray Drying Process

Controllable Preparation of Sio2 Nanoparticles Using A Microfiltration Membrane Dispersion Microreactor

Preparation of Porous Silica Spheres with Self-Dispersing Properties

Synthesis of ordered small pore mesoporous silicates with tailorable pore structures and sizes by polyoxyethylene alkyl amine surfactant

Increasing the Porosity of Silica Particles by Reducing the Thickness of Nanochannel Walls and Producing an Additional System of Micropores

Ultrasound As a Tool to Synthesize Nano-Sized Silica–Alumina Catalysts with Controlled Mesoporous Distribution by a Novel Sol–Gel Process

Preparation of Nano Silicon Dioxide with Sol-Gel Method