Abstract:In recent years, inspired by “biomimicry”, superhydrophobic surfaces have gained significant attention. Superhydrophobic surfaces demonstrate notable advantages in addressing interfacial issues, and superhydrophobic coatings exhibit excellent waterproofness, anti-fouling, self-cleaning, anti-corrosion, and additional capabilities, making them promising next-generation waterproof materials. However, the complex preparation process, coupled with poor wear resistance and environmental durability, severely limits their practical applications. Therefore, this article started from simplifying the preparation process and improving the durability of the coatings. Epoxy resin (E51) was used as the film-forming material, and carbon nanotubes (CNTs) and dual-sized SiC particles (nano-SiC and micro-SiC) were used as the fillers. Room temperature vulcanized silicone rubber (RTV) was used as a binder interacting with epoxy resin to promote the interface interaction between the fillers and the polymers. This process resulted in the successful preparation of superhydrophobic coatings with outstanding comprehensive performance. When the ratio of μ-SiC to n-SiC was 1:1, the prepared coating exhibited the best superhydrophobic properties with a water contact angle (WCA) of 167.4° and a sliding angle (SA) of 4.6°. Even after undergoing severe mechanical tests, such as sandpaper abrasion for 1000 cycles, sand impact for 100 cycles, cross-cut test, and tape-peeling for 70 cycles, the coatings still maintained their non-wetting Cassie-Baxter state. Furthermore, even after immersion in strong acid, strong alkali and 3.5 wt% NaCl solutions for 6 days, keeping at 500 °C for 2 hours, and exposure to ultraviolet for 6 days, the coatings still exhibited excellent superhydrophobicity. This suggested that the prepared coating had excellent chemical stability and high-temperature resistance. In addition, the superhydrophobic coating exhibited exceptional capabilities in self-cleaning, anti-corrosion, anti-icing, and de-icing properties. Furthermore, this coating, applicable to diverse substrates including board, steel, paper, and glass, demonstrated an impressive water contact angle (WCA) and sliding angle (SA). The spraying method offers the benefits of simplicity and cost-effectiveness. This is poised to significantly broaden its practical applications in various fields, including construction, transportation, and the chemical industry.

Fabrication of Superhydrophobic Surfaces Via Caco3 Mineralization Mediated by Poly(Glutamic Acid)

Formation of AlOOH and Silica Composite Hierarchical Nanostructures Thin Film by Sol–gel Dip-Coating for Superhydrophobic Surface with High Adhesion Force

Fabrication of Air-Permeable Superhydrophobic Surfaces with Excellent Non-Wetting Property

Achieving of Bionic Super-Hydrophobicity by Electrodepositing Nano-Ni-pyramids on the Picosecond Laser-Ablated Micro-Cu-cone Surface

Design of a Superhydrophobic Surface Using Woven Structures

Calcium Carbonate@silica Composite with Superhydrophobic Properties

Fabrication of mechanically robust superhydrophobic surfaces based on silica micro-nanoparticles and polydimethylsiloxane

Fabrication and Anti-Frosting Performance of Super Hydrophobic Coating Based on Modified Nano-Sized Calcium Carbonate and Ordinary Polyacrylate

Carbon Quantum Dots-Driven Surface Morphology Transformation Towards Superhydrophobic Poly(lactic Acid) Film

One-Step Hydrothermal Creation of Hierarchical Microstructures Toward Superhydrophilic and Superhydrophobic Surfaces

Large-Scale Fabrication of Graded Convex Structure for Superhydrophobic Coating Inspired by Nature

Packing the Silica Colloidal Crystal Beads: A Facile Route to Superhydrophobic Surfaces

Fabrication of a Lotus-Like Micro-Nanoscale Binary Structured Surface and Wettability Modulation from Superhydrophilic to Superhydrophobic.

Fabrication of high-durability superhydrophobic coatings based on dual-sized SiC particles

Azeotropic Binary Solvent System Containing Nonfluorinated Polymer-Grafted Silica Nanoparticles for the Fabrication of a Superhydrophobic Surface

Robust and transparent superamphiphobic coating prepared via layer-by-layer spraying

Fabrication of Transferable and Micro/Nanostructured Superhydrophobic Surfaces Using Demolding and iCVD Processes

Fabrication and Condensation Characteristics of Metallic Superhydrophobic Surface with Hierarchical Micro-Nano Structures

A simple fabrication method for mechanically robust superhydrophobic surface by hierarchical aluminum hydroxide structures

Durable superhydrophobic surface prepared by designing “micro-eggshell” and “web-like” structures

Fabrication of Ultra Hydrophobic Surface Coating