Abstract:The surface chemical modification for the vapour grown carbon fibers(VGCF) produced with the catalytic dehydrogenation of hydrocarbon have been performed by concentrate nitric acid (65%~68%) for various times in order to extend the practical application in composite materials. The structure of VGCF has been characterized by XRD technique. The XRD results show that the graphite crystal structures of VGCF are transformed upon modification, and the extent of transformation is a function of modification time. The BET results indicate that through the modification the SBET of VGCF veries, and as the long modification time of 120 min is used, the SBET of VGCF decreases distinctly. The FTIR analyses illuminate that due to the modification the different functional oxygen-containing groups are grown on these surfaces of VGCF, and the total amount of the oxygen-containing groups increases with the modification time. In addition, the profiles of temperature programmed reduction (TPR) display that more than two kinds of oxygen-containing functional groups exist on the surfaces of VGCF and the total amount of oxygen for these oxygen-containing functional groups obtained is more than 2 mmol·g-1. The microcalorimetric measurements of NH3 adsorption indicate that the strength and the amount of the functional groups of surface acids increase with the modification time. The transmission electron microscopy (TEM) shows that during modification no damage is observed on these surfaces of the VGCF. The experiments of absorbed oil value (AOV) exhibite that the AOV decreases sharply whereas the hydrophilicity of VGCF increases. Double fluid method for the measurements of the contact angles shows that after modification the surface energy (SE) of VGCF increases apparently. The FTIR measurements of the modified VGCF treated with the titanate coupling agent indi

Surface Modification of Nano-calcium Carbonate by Composite Modifier

Modulation of nano CaCO3pore size and effect on properties of carbonation reaction

The Mechanical and NIR Studies on Ultrafine Calcium Carbonate Treated by Four Surface Modifiers.

Adsorption Properties of Coating Modified Nano CaO-Based CO2 Adsorbents

Modified Kinetics Model of Nano CaO Reactions with CO2 in a CaO-Based Adsorbent

Mechanism and surface characteristics of polyacrylic acid-coated ultra-fine CaCO3

Surface Modification of Halloysite/Sericite

The Study on Mechanism, Interfacial Properties of PS-b-PAA Copolymer Coated Calcium Carbonate Particulate

Surface Energy Study Of Alooh Coated Calcium Carbonate By Inverse Gas Chromatography

Surface Modification of CaCO3 by Ultrasound-Assisted Titanate and Silane Coupling Agents

Surface Modification Of Caco3 With Dendritic Carboxylic Acids

Reinforcement of reactive nano-calcium carbonate to NR

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Method for preparing nano modifier for cement-base material

Preparation and In-Situ Surface Modification of CaCO3 Nanoparticles with Calcium Stearate in a Microreaction System

The study on surface modification process of nanometer CeO2

Preparation of Poly (methyl Methacrylate)/nanometer Calcium Carbonate Composite by In-Situ Emulsion Polymerization

Effect of Anionic Surfactant on Adsorption Properties of Nano Calcium Carbonate

Surface Modification and Characterization of Vapor Grown Carbon Fibers

Study on surface modification of ground calcium carbonate with novel modifier and its PVC filling performance

Surface modification of calcium carbonate: A review of theories, methods and applications