Abstract:The superior mechanical properties and thermal stability of Ti-Al-Si-N coatings have attracted extensive research interests in academia as well as industry. In this study, Ti0.52Al0.48N, Ti0.53Al0.38Si0.09N, Ti0.43Al0.48Si0.09N, and Ti0.48Al0.38Si0.14N coatings are developed by arc-evaporation. This compositional variation allows to study the impact of Al and Si on structure, thermal stability, and oxidation behavior. Incorporation of Si into Ti-Al-N leads to a nanocomposite structure with an amorphous-like SiNx boundary-phase – encapsulating small crystalline Ti-Al-N grains – and promotes wurtzite-type AlN formation. This causes a significant change in the mechanical and thermal properties of the originally single-phase face-centered cubic structured Ti0.52Al0.48N. The Si-containing coatings experience an initial increase in hardness from 29.1 ± 1.0 GPa for Ti0.52Al0.48N to 33.1 ± 1.2 GPa for Ti0.53Al0.38Si0.09N, and then a decrease to 26.4 ± 0.8 GPa for Ti0.43Al0.48Si0.09N and 28.1 ± 0.8 GPa for Ti0.48Al0.38Si0.14N. Alloying with Si improves the thermal stability of Ti-Al-N by retarding the decomposition towards its thermodynamically stable constituents TiN and AlN. Moreover, the oxidation resistance of Ti-Al-N can be largely improved by the Si-addition due to the retarded anatase-to-rutile TiO2 transformation as well as the formation of a protective oxide scale at the nitride-to-oxide interface. Cross-sectional scanning electron microscopy studies reveal that the oxide scales of the Si-containing coatings exhibit a lamellar structure comprising Al-rich, TiSi-rich, and/or Ti-rich oxide layers. Higher Si and, especially, higher Al content is favorable to the formation of an Al-rich layer, which can act as a diffusion barrier for oxygen. Especially, all Si-containing coatings present an abnormal oxidation behavior, where the consumed nitride layer thickness is not continuously increasing with oxidation temperature.

Surface Modification Of Nano-Sic Powders By Coating With Heterogeneous Nucleation Process

Effect of Submicron SiC Particles on the Properties of Alcocrfeni High Entropy Alloy Coatings

Fundamental nanoscale surface strategies for robustly controlling heterogeneous nucleation of calcium carbonate

Water-Based Gelcasting of Surface-Coated Silicon Nitride Powder

Preparation of composite coating particles of α-Al2O3–SiO2 by heterogeneous nucleation-and-growth processing

Non hydrolizable aluminum nitride powders surface modified by silicic acids

Electrodeposition and Characterization of Nano-Structured Ni–SiC Composite Films

Preparation of Core/Shell Structure of α-Al(OH) 3 -SiO 2 by Heterogeneous Nucleation-and-Growth Processing

Surface Characterization of Silicon Nitride Powder and Electrokinetic Behavior of Its Aqueous Suspension

Cathode plasma electrolytic deposition of Al2O3 coatings doped with SiC particles

Improved Sintering Ability of SiC Ceramics from SiC@Al2O3 Core-Shell Nanoparticles Prepared by a Slow Precipitation Method

Fabrication of Α-Alo(oh)·sio2 with Core-Shell Structures by Heterogeneous Nucleation-and-growth Processing

Microstructure and mechanical properties of SiC-Al2O3 nanocomposite prepared by surface modified SiC nanopowders

Dispersion Properties of Silicon Nitride Powder Coated with Yttrium and Aluminium Precursors

The Coating Process of Nano-scale Hydrous Silica Film on TiO2 Particles by Chemical Deposition in Aqueous Solution

Preparation of dense modified nanosilica superhydrophilic coatings on aluminum alloy surfaces by adjusting amino groups

Synthesis and Surface Modification of a Rod Shaped Nanometer gamma-Al2O3

Using in-situ conversed nano SiC to bond UHTC particles and construct anti-ablation coating

Fabrication of Composite Coating Particles with Mullite Stoichiometric Ratio by a Novel Processing

Effect of Si-addition on structure and thermal stability of Ti-Al-N coatings

EFFECT OF AL(2)O(3) AND SIC CONTENT IN PACK CEMENTATION POWDERS ON THE MICROSTRUCTURE OF SIC COATINGS ON HTR GRAPHITE SPHERES