Abstract:As one of the most widely used inorganic fine powder fillers, calcium carbonate is cheap. However, considering its poor light transmittance, it is not suitable to be added to resin matrix composites that require high light transmittance. Aluminum hydroxide has good light transmission and flame retardancy, but it is more expensive than calcium carbonate. CaCO3/Al(OH)3 composites with a core-shell structure that showed a trend toward the performance of aluminum hydroxide not only improved the surface properties of CaCO3, but also increased the added value of CaCO3. In the present paper, CaCO3/Al(OH)3 composites were successfully prepared in sodium aluminate solution via heterogeneous nucleation. Four types of calcium sources, including calcite-type precipitated calcium carbonate, vaterite-type precipitated calcium carbonate, ground calcium carbonate with two different particle sizes as the precursors and supersaturated sodium aluminate solution as the substrate, have been deeply investigated in terms of their influence on the preparation of CaCO3/Al(OH)3 composites. Results showed that the calcium carbonate precursor greatly affected the formation of CaCO3/Al(OH)3 composites. Both the precipitated calcium carbonate and the small particle ground calcium carbonate are likely to undergo anti-causticization and a complexation reaction with it to generate 3CaO·Al2O3·6H2O and 3CaO·Al2O3·CaCO3·11H2O, which go against the coating of calcium carbonate with aluminum hydroxide. Within the experimental range, the use of ground calcium carbonate with a particle size of 400-500 mesh is more suitable as a precursor for the preparation of core-shell CaCO3/Al(OH)3 composites.

Preparation of Core/Shell Structure of α-Al(OH) 3 -SiO 2 by Heterogeneous Nucleation-and-Growth Processing

Preparation of composite coating particles of α-Al2O3–SiO2 by heterogeneous nucleation-and-growth processing

Fabrication of Α-Alo(oh)·sio2 with Core-Shell Structures by Heterogeneous Nucleation-and-growth Processing

Fabrication of Composite Coating Particles with Mullite Stoichiometric Ratio by a Novel Processing

Fabrication of composite particles with core-shell structures by a novel processing

Fabrication of Fine Mullite Powders by Heterogeneous Nucleation and Growth Processing

Fabrication of Composite Coating Spheres with Silica Sphere/titania Shell Structure by Heterogeneous Nucleation-and-growth Processing

Study on the densification of composite coating particles of α-Al2O3–SiO2

Effect Of Silica Sol On The Properties Of Alumina-Based Duplex Ceramic Cores

Preparation and Characterization of Radially Porous Silica and the Core-shell Structure

Fabrication of Mullite Powders by A Novel Processing

Effect of Particle Size on Properties of Alumina-Based Ceramic Cores

Fabrication of ultrafine mullite powders

Preparation of Silica@Silica Core-Shell Microspheres Using an Aqueous Two-Phase System in a Novel Microchannel Device.

Surface Modification Of Nano-Sic Powders By Coating With Heterogeneous Nucleation Process

Preparation and characteristics of core-shell structure Y 3Al 5O 12:Yb 3+@SiO 2 nanoparticles

Preparation and Characterization of Core–shell Structured Co/SiO2 Nanosphere

Synthesis and Characterization of Aluminum Particles Coated with Uniform Silica Shell

Preparation of CaCO3/Al(OH)3 Composites via Heterogeneous Nucleation

Inorganic microencapsulated core/shell structure of Al-Si alloy micro-particles with silane coupling agent

Preparation And Thermal Stability Of The Spindle Alpha-Fe2o3@Sio2 Core-Shell Nanoparticles