Abstract:Several papers describe the treatment of calcium carbonate (CaCO3) with stearic acid acting as a surface modifier, in order to avoid particle coalescence and, at the same time, enhancing filler hydrophobic properties. However, there is still a lack of data relating the efficiency of a traditional modifier used, stearic acid, in the synthesis of CaCO3 nanofiller with other modifiers in terms of inhibition of the agglomeration process during the synthesis. Thus, the present work evaluates the stability of CaCO3 nanoparticles obtained by a carbonation reaction, considering the contents of the crystallization inhibitor (trisodium phosphate-Na3PO4) and the surface modifier (myristic acid) applied. In order to achieve an efficient carbonation process, a bubbling system was used. The results showed that higher surface modifier and crystallization inhibitor contents lead to a narrower particle size distribution and a lower particle size. Comparing the CaCO3 nanoparticles coated with myristic acid (CaCO3-MA) and with stearic acid (CaCO3-SA), it was observed that CaCO3-MA has a higher thermal stability and a lower particle size in relation to CaCO3-SA. Besides this, a more spherical geometry was achieved for CaCO3-MA nanoparticles due to the bubbling system applied during the carbonation reaction.The present study compare the properties between CaCO3 nanoparticles synthesized with myristic acid (MA) with a commercial CaCO3 grade, modified with stearic acid (SA). The results showed that CaCO3-MA has a higher thermal stability and a lower particle size in relation to CaCO3-SA. Beyond this, shape more spherical was achieved for CaCO3-MA nanoparticles due to the bubbling system used during carbonation reaction.

In Situ Preparation of Hydrophobic CaCO3 Nanoparticles in a Gas–liquid Microdispersion Process

A new nano CaO-based CO2 adsorbent prepared using an adsorption phase technique

Preparation and In-Situ Surface Modification of CaCO3 Nanoparticles with Calcium Stearate in a Microreaction System

Fundamental nanoscale surface strategies for robustly controlling heterogeneous nucleation of calcium carbonate

In Situ Preparation of CaTiO3 and Its Effect on CO2 Sorption Performance of Nano-Cao–catio3 Adsorbent

Adsorption Properties of Coating Modified Nano CaO-Based CO2 Adsorbents

Formation of A Ca12al14o33 Nanolayer and Its Effect on the Attrition Behavior of Co2-Adsorbent Microspheres Composed of Cao Nanoparticles

Preparation of Nano-CaCO3 from Phosphogypsum by Gas–Liquid–Solid Reaction for CO2 Sorption

Study on the kinetics of Ca-based CO2 sorbent of carbonation and calcination for adsorption enhanced reforming process

Synthesis of a Porous Nano‐CaO/MgO‐Based CO2 Adsorbent

Preparation of MgO-coated Nano CaO Using Adsorption Phase Reaction Technique for CO2sorption

Behavior of CaTiO3/Nano-CaO As a CO2 Reactive Adsorbent

Surface Modification of CaCO3 by Ultrasound-Assisted Titanate and Silane Coupling Agents

Preparation and characterization of ultra-hydrophobic calcium carbonate nanoparticles

Thermal Treatment to Improve the Hydrophobicity of Ground CaCO3 Particles Modified with Sodium Stearate

Myristic acid as surface modifier of calcium carbonate hydrophobic nanoparticles

Preparation of Polystyrene/Sio2 Composite Nanoparticles Bearing Sulfonic Groups on the Surface Via Emulsion Copolymerization Using A Polymerizable Emulsifier

Controllable Preparation of Sio2 Nanoparticles Using A Microfiltration Membrane Dispersion Microreactor

Preparation of ultrafine calcium carbonate particles with micropore dispersion method

In Situ Monitoring the Nucleation and Growth of Nanoscale CaCO3 at the Oil-Water Interface

Preparation of Highly Dispersed Precipitated Nanosilica in a Membrane Dispersion Microreactor