Abstract:Several papers describe the treatment of calcium carbonate (CaCO3) with stearic acid acting as a surface modifier, in order to avoid particle coalescence and, at the same time, enhancing filler hydrophobic properties. However, there is still a lack of data relating the efficiency of a traditional modifier used, stearic acid, in the synthesis of CaCO3 nanofiller with other modifiers in terms of inhibition of the agglomeration process during the synthesis. Thus, the present work evaluates the stability of CaCO3 nanoparticles obtained by a carbonation reaction, considering the contents of the crystallization inhibitor (trisodium phosphate-Na3PO4) and the surface modifier (myristic acid) applied. In order to achieve an efficient carbonation process, a bubbling system was used. The results showed that higher surface modifier and crystallization inhibitor contents lead to a narrower particle size distribution and a lower particle size. Comparing the CaCO3 nanoparticles coated with myristic acid (CaCO3-MA) and with stearic acid (CaCO3-SA), it was observed that CaCO3-MA has a higher thermal stability and a lower particle size in relation to CaCO3-SA. Besides this, a more spherical geometry was achieved for CaCO3-MA nanoparticles due to the bubbling system applied during the carbonation reaction.The present study compare the properties between CaCO3 nanoparticles synthesized with myristic acid (MA) with a commercial CaCO3 grade, modified with stearic acid (SA). The results showed that CaCO3-MA has a higher thermal stability and a lower particle size in relation to CaCO3-SA. Beyond this, shape more spherical was achieved for CaCO3-MA nanoparticles due to the bubbling system used during carbonation reaction.

Myristic acid as surface modifier of calcium carbonate hydrophobic nanoparticles

Preparation and In-Situ Surface Modification of CaCO3 Nanoparticles with Calcium Stearate in a Microreaction System

The Study on Mechanism, Interfacial Properties of PS-b-PAA Copolymer Coated Calcium Carbonate Particulate

The Mechanical and NIR Studies on Ultrafine Calcium Carbonate Treated by Four Surface Modifiers.

Mechanism and surface characteristics of polyacrylic acid-coated ultra-fine CaCO3

In Situ Preparation of Hydrophobic CaCO3 Nanoparticles in a Gas–liquid Microdispersion Process

Study on Surface Modification of Nano-Calcium Carbonate in Ethanol and Its In-situ Composite

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Mechano-activated Surface Modification of Calcium Carbonate in Wet Stirred Mill and Its Properties

Thermal Treatment to Improve the Hydrophobicity of Ground CaCO3 Particles Modified with Sodium Stearate

INFLUENCE OF SURFACE-MODIFICATION FOR CALCIUM CARBONATE ON THE INTERACTION BETWEEN THE FILLERS AND POLYDIMETHYLSILOXANE

Assessment of efficacy of trivalent lanthanum complex as surface modifier of calcium carbonate

Effect of Dispersants on the Stability of Calcite in Non-Polar Solutions

Surface modification of nanosized biphasic alpha-TCP/HA powders

In-Situ Heterogenous Polymerization of Methyl Methacrylateonto Nanometer Calcium Carbonate Particles

Preparation and characterization of ultra-hydrophobic calcium carbonate nanoparticles

Surface modification of hydroxyapatite by stearic acid: characterization and in vitro behaviors

Surface Modification of Nanosized Biphasic α-TCP/HA Powders

Synergistic Influences of Stearic Acid Coating and Recycled PET Microfibers on the Enhanced Properties of Composite Materials

Surface Modification of Natural Fibrous Brucite with Stearic Acid

Effects of Surface Modification with Stearic Acid on the Dispersion of Some Inorganic Fillers in PE Matrix