Abstract:The hydrothermal carbonation of calcium hydroxide (Ca(OH)2) at high pressure of CO2 (initial PCO2 1/4 55 bar) and moderate to high temperature (30 and 90 1C) was used to synthesize fine particles of calcite. This method allows a high carbonation efficiency (about 95% of Ca(OH)2-CaCO3 conversion), a significant production rate (48 kg/m3 h) and high purity of product (about 96%). However, the various initial physicochemical conditions have a strong influence on the crystal size and surface area of the synthesized calcite crystals. The present study is focused on the estimation of the textural properties of synthesized calcite (morphology, specific surface area, average particle size, particle size distribution and particle size evolution with reaction time), using Rietveld refinements of X-ray diffraction (XRD) spectra, Brunauer-Emmett-Teller (BET) measurements, and scanning electron microscope (SEM) and transmission electron microscope (TEM) observations. This study demonstrate that the pressure, the temperature and the dissolved quantity of CO2 have a significant effect on the average particle size, specific surface area, initial rate of precipitation, and on the morphology of calcium carbonate crystals. In contrast, these PTx conditions used herein have an insignificant effect on the carbonation efficiency of Ca(OH)2. Finally, the results presented here demonstrate that nano-calcite crystals with high specific surface area (SBET 1/4 6-10m2/g) can be produced, with a high potential for industrial applications such as adsorbents and/or filler in papermaking industry.

Surface coating of anhydrite powders with CaCO3 nano-particles prepared in Ca(OH)2-H2O-CO2 system

Mechanism and surface characteristics of polyacrylic acid-coated ultra-fine CaCO3

Performance of Nano-Caco3 Coated with SiO2 on CO2 Adsorption at High Temperature

Adsorption Properties of Coating Modified Nano CaO-Based CO2 Adsorbents

The Mechanical and NIR Studies on Ultrafine Calcium Carbonate Treated by Four Surface Modifiers.

Minicrystal And Xps Analysis Of Sio2 Coated Superfine Caco3 Powder

Surface Energy Study Of Alooh Coated Calcium Carbonate By Inverse Gas Chromatography

The Study on Mechanism, Interfacial Properties of PS-b-PAA Copolymer Coated Calcium Carbonate Particulate

Study on the Surface Modification of Slurry and Powder of Nano-Caco3 Synthesized by Supergravity Reaction- Crystallization Method

Surface Modification of CaCO3 by Ultrasound-Assisted Titanate and Silane Coupling Agents

The Effect of Annealing on Microstructure and High Temperature Erosion Property of Arc-Spraying Coatings Containing Nanosized Ceramic Powders

Surface Modification Of Nano-Sic Powders By Coating With Heterogeneous Nucleation Process

Preparation and In-Situ Surface Modification of CaCO3 Nanoparticles with Calcium Stearate in a Microreaction System

Preparation of ultrafine calcium carbonate particles with micropore dispersion method

Preparation of composite wollastonite powder with nano structure surface

Wet mechanochemical surface modification of calcite employing an integration of conventional design and analytical hierarchy process

Research on dolomite powder with nanometer surface structure

Textural properties of synthetic nano-calcite produced by hydrothermal carbonation of calcium hydroxide

Surface Modification of Nano-calcium Carbonate by Composite Modifier

The Preparation of Caco3 Nanoparticles by Adding Paana and Its Product Characterization

Effect of processing parameters on the preparation of composite GCC with nano structure surface