Abstract:In this paper, simulation modeling was carried out using Sentaurus Technology Computer-Aided Design. Two types of high electron mobility transistors (HEMT), an AlGaN/GaN/AlGaN double heterojunction and AlGaN/GaN single heterojunction, were designed and compared. The breakdown characteristics and damage mechanisms of the two devices under the injection of high-power microwaves (HPM) were studied. The variation in current density and peak temperature inside the device was analyzed. The effect of Al components at different layers of the device on the breakdown of HEMTs is discussed. The effect and law of the power damage threshold versus pulse width when the device was subjected to HPM signals was verified. It was shown that the GaN HEMT was prone to thermal breakdown below the gate, near the carrier channels. A moderate increase in the Al component can effectively increased the breakdown voltage of the device. Compared with the single heterojunction, the double heterojunction HEMT devices were more sensitive to Al components. The high domain-limiting characteristics effectively inhibited the overflow of channel electrons into the buffer layer, which in turn regulated the current density inside the device and improved the temperature distribution. The leakage current was reduced and the device switching characteristics and breakdown voltage were improved. Moreover, the double heterojunction device had little effect on HPM power damage and high damage resistance. Therefore, a theoretical foundation is proposed in this paper, indicating that double heterojunction devices are more stable compared to single heterojunction devices and are more suitable for applications in aviation equipment operating in high-frequency and high-voltage environments. In addition, double heterojunction GaN devices have higher radiation resistance than SiC devices of the same generation.

High power microwave effect of electrostatic discharge type GGMOS protection device

Analysis of Electro-Thermal-Stress Failure of the Ldmos Fet under Hpm Pulses

Experimental Investigation and Analysis of the LDMOS FET Breakdown Under HPM Pulses

Electro-Thermal-Stress analysis of a LDMOS FET Breakdown under High Power Microwave pulses

Analysis of the Thermal Effects of Gaasfets under the High-Power Electromagnetic Pulses

An Electro-Thermal Analysis of Lateral Double-diffused MOSFET(LDMOS) Using FEM

Electro-thermal-stress interaction of GaN HEMT breakdown induced by high power microwave pulses

Thermal Accumulation Effects on the Transient Temperature Responses in LDMOSFETs Under the Impact of a Periodic Electromagnetic Pulse

Thermal Transient Response Of Gaas Fets Under Intentional Electromagnetic Interference (Iemi)

Analysis of 65 Nm Technology Grounded-Gate NMOS for On-Chip ESD Protection Applications

Investigation on conductive electromagnetic pulse (EMP) effects on the breakdown of GaAs MESFET-built power amplifiers (PA)

Study on ESD Effects of GaAs HBT Power Amplifiers for DCS/GSM Dual Band Handsets

Effects of process variation on turn-on voltages of a multi-finger gate-coupled NMOS ESD protection device

Combined effect of total ionizing dose and electromagnetic pulse on MOSFET devices

Ggnmos As Esd Protection in Different Nanometer Cmos Process

Trigger voltage walk-in effect of ESD protection device in HVCMOS

Effects of Finger Width and Metal Routing of GGNMOS on ESD Protection

Study of Self-Heating and High-Power Microwave Effects for Enhancement-Mode p-Gate GaN HEMT

ESD Circuits Design for High-Speed Analog CMOS Integrated Circuits

Damage Effects and Mechanisms of High-Power Microwaves on Double Heterojunction GaN HEMT

Effect of poly-silicon gate on ESD protection performance of LDMOS-SCR devices