Abstract:The successful joining of carbon fiber-reinforced aluminum matrix (Cf/Al) composites and TC4 alloy can produce composite structure and meet the demands of lightweight in aerospace field. Up to now, few experimental researches have been reported on the joining of Cf/Al composites and TC4 alloy. In this study, the AgCu foils and Ni–Al–Zr compact were designed for the self-propagating high-temperature synthesis joining of these two materials. Cf/Al composites were joined with a reactive Ti plated on its joining surface. The typical microstructure of TC4/(AgCu/Ni–Al–Zr/AgCu)/Ti/Cf/Al joint was analyzed, and the effects of joining condition on microstructural evolution of the SHS joint were investigated. A thin reaction layer of Ni–Al–Ti intermetallic compounds was formed adjacent to the TC4 alloy. As a result, AgCu foils could reduce the effect of reaction heat on the substrates and improve the joint shear strength. When the thickness of AgCu foils reaches 150 μm, the Ni–Al–Zr interlayer mainly acts as auxiliary heat source. High joining pressure caused the active elements to diffuse into Cf/Al composites and weakened the shear strength of the joint. Finally, the joint shear strength could reach 36.4 MPa when the AgCu foils were 50 μm and the joining pressure was 2 MPa.

Joining of TiAl Intermetallic by Self-Propagating High-Temperature Synthesis

Microstructure and Formation Mechanism of SHS Joining Between C F /al Composites and TiAl Intermetallic with Al–Ni–CuO Interlayer

Effect of Reaction Heat on Reactive Joining of TiAl Intermetallics Using Ti–Al–C Interlayers

SHS joining of TiAl intermetallics to TiB2 cermet

Microstructure evolution and formation mechanism of laser-ignited SHS joining between C f /Al composites and TiAl alloys with Ni–Al–Ti interlayer

High-efficiency Joining of Cf/Al Composites and TiAl Alloys under the Heat Effect of Laser-ignited Self-propagating High-temperature Synthesis

Formation Mechanism and Microstructure of C_f/Al and TiAl Joint by SHS Joining with Al-Ni-CuO Interlayer

Self-propagating Synthesis Joining of Cf/Al Composites and TC4 Alloy Using AgCu Filler with Ni–Al–Zr Interlayer

Mlicrostructure of TiAl/TiC cermet joint bonded by combustion synthesis

Effect of Ti–Al Content on Microstructure and Mechanical Properties of Cf/Al and TiAl Joint by Laser Ignited Self-Propagating High-Temperature Synthesis

Microstructure of TiAl/TiC cermet joint bonded by combustion synthesis

Reaction Sintering and Joining Nickel Aluminide to AISI 316 Stainless Steel by Self-Propagating High Temperature Synthesis

Preparation of Ti3AlC2 and Ti2AlC by self-propagating high-temperature synthesis and study on the reaction mechanism

Effect of Composition of Interlayer on TiAl/TiB2 Cermet Self-Propagating High-Temperature Synthesis Joint

PREPARATION OF Ti3AlC2 AND Ti2AlC BY SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS AND STUDY ON MECHANISM OF THE REACTION

In situ fabrication of TiC particulates locally reinforced aluminum matrix composites by self-propagating reaction during casting

Al3Ti/Al composites prepared by SHS

Preparation of Ti 3 AlC 2 and Ti 2 AlC by self-propagating high-temperature synthesis

Combustion Joining of Carbon–carbon Composites to TiAl Intermetallics Using a Ti–Al–C Powder Composite Interlayer

Effect of Sn and Si on the Synthesis of Ti<sub>3</sub>Al(Sn/Si)C<sub>2</sub> by Self-Propagating High-Temperature Sintering

Preparation of Al–TiC Composites by Self-Propagating High-Temperature Synthesis