Abstract:Ag-27.5Cu–1Ni-0.5Li foil was employed to realize transient liquid phase (TLP) diffusion bonding of C/C composite and Ti3Al alloy successfully. C/C composite|Ti3Al alloy joints without obvious defects were obtained under 870 °C, 10min due to sufficient element diffusion and reactions between the interlayer and parent materials. According to the analysis results of the interface structure and element distribution in joints, AgCuNiLi alloy can spread and fill the joint presenting good wettability and chemical compatibility with parent materials, as well as Ti can diffuse from Ti3Al alloy into interlayer and react with C in interfacial layer adjacent C/C composite to form reaction layer during the bonding process. As a result, the joints with gradational structure, i.e. C/C| TiC + C| Ag (s, s) |Ag (s, s) + Ti–Cu intermetallics | diffusion layer|Ti3Al can be formed, which can improve the mechanical properties of the joints effectively, and the average shear strength of the joints can reach 33.78 ± 2.84 MPa. The shear fracture surface mainly occurs in reaction layer adjacent C/C composite extending into interlayer and presents rugged morphology, which can attribute to the permeation of liquid phase in C/C composite and ragged interface.

Combustion Joining of Carbon–carbon Composites to TiAl Intermetallics Using a Ti–Al–C Powder Composite Interlayer

Combustion synthesis of TiAl intermetallics and their simultaneous joining to carbon/carbon composites

Effects of Joining Conditions on Microstructure and Mechanical Properties of C F /al Composites and TiAl Alloy Combustion Synthesis Joints

Effect of Reaction Heat on Reactive Joining of TiAl Intermetallics Using Ti–Al–C Interlayers

Mlicrostructure of TiAl/TiC cermet joint bonded by combustion synthesis

Microstructure of TiAl/TiC cermet joint bonded by combustion synthesis

Microstructure and Formation Mechanism of SHS Joining Between C F /al Composites and TiAl Intermetallic with Al–Ni–CuO Interlayer

Brazing of C/C Composite and TiAl Alloy Using TiNiSi Filler Metal Added Cu Interlayer

Formation Mechanism and Microstructure of C_f/Al and TiAl Joint by SHS Joining with Al-Ni-CuO Interlayer

Self-propagating Synthesis Joining of Cf/Al Composites and TC4 Alloy Using AgCu Filler with Ni–Al–Zr Interlayer

Brazing of C/C Composite to TiAl Alloy Using (ti/ni/cu)f Multi-foil Filler

Microstructure and mechanical properties of C/C composite| Ti3Al alloy joints prepared by transient liquid phase diffusion bonding using AgCuNiLi alloy as joining material

Microstructure evolution and formation mechanism of laser-ignited SHS joining between C f /Al composites and TiAl alloys with Ni–Al–Ti interlayer

Brazing Mechanism and Infiltration Strengthening of CC Composites to TiAl Alloys Joint

Brazing of Gr/2024Al composite and TC4 using AgCuTi filler with the assist of Ti-Al-C-Cu interlayer

Active Brazing of C/C Composites and Single Crystal Ni-based Superalloy: Interfacial Microstructure and Formation Mechanism

Microstructure and mechanical properties of C/C composite/TC4 joint using AgCuTi filler metal

Interfacial microstructure and mechanical properties of Ti/Cu joint manufactured by Ni-Al thermal explosion reaction

High-efficiency Joining of Cf/Al Composites and TiAl Alloys under the Heat Effect of Laser-ignited Self-propagating High-temperature Synthesis

Laser-induced Combustion Joining of Cf/Al Composites and TC4 Alloy

Joining of TiAl Intermetallic by Self-Propagating High-Temperature Synthesis