Abstract:The near-net-shape characteristics of Additive Manufacturing offer significant advantages in fabricating SiCp/Al composite components. However, the high-temperature melt pool during the deposition process promotes an interface reaction between SiC and Al, forming Al4C3. Al 4 C 3 shortens the service life of SiC p /Al composite structural components, so it is critical to avoid its formation when preparing SiC p /Al composites via laser-directed energy deposition. This study prepared SiC p /Al composite components through coincident wire powder laser-directed energy deposition with Ti alloying, effectively preventing the formation of Al4C3 in AMC. Furthermore, it investigated the effect of Ti atoms on the microstructural evolution and strengthening mechanism. The results showed that the formation of large flake-like Al 4 C 3 was avoided without generating excess Al 3 Ti only when using an appropriate amount of Ti (Ti: SiC = 3: 10). After introducing Ti, Ti atoms in the melt pool migrated towards the SiC surface and reacted with C atoms (from the dissolution of SiC) and formed TiC. The resulting TiC enclosed the SiC particles in a thin film, preventing the further dissolution of SiC and inhibiting the generation of Al4C3. Additionally, some TiC nanoparticles dispersed within the matrix, serving as heterogeneous nucleation sites for Al, reducing the average equivalent circular grain radius from 38.10 μm to 7.20 μm. After Ti alloying, the average modulus and yield strength of AMC both increased. This increase was attributed to the load transfer energy of SiC particles, grain refinement of the matrix, and the dispersion-strengthening effect of TiC nanoparticles. An intrinsic relationship between the SiC-Al-Ti interfacial reaction and the mechanical properties of SiCp/Al composites has been established to provide theoretical guidance for eliminating Al4C3 phases in SiCp/Al composites prepared by laser-directed energy deposition, ensuring performance comparable to traditionally fabricated products.

In-situ formation Ti-Al-C compounds reinforced SiCp/2A14 Al joint: Microstructure evolution and mechanical properties

Microstructure Evolution and Mechanical Properties of 20%SiCp/Al Joint Prepared via Laser Welding

Laser Beam Oscillation Welded SiCp/2xx Al Alloy: Microstructure, Phase Interface and Mechanical Properties

New insight into laser butt welded nonporous SiCp/2A14Al joint: Interfaces, precipitation phase and mechanical properties

Characterization of Si–Cu–C–Al quaternary interface of SiC/2A14 joint via counterintuitive laser butt welding

Laser welding of SiCp/2024Al composites with novel TiB2/2024Al composite filler

Microstructure evolution and mechanical properties strengthening in laser powder bed fusion of high-strength SiC and TiB 2 co-reinforced Al-Zn-Mg-Cu composites

Investigation of Ti alloying for microstructural evolution and strengthening mechanism: Avoiding Al 4 C 3 formation in SiC p /Al composites via laser directed energy deposition

Microstructure and mechanical properties of C f /SiC composite joints joined using AlCoCrFeNi 2.1 eutectic high-entropy alloy filler via spark plasma sintering

Effects of laser power on the microstructural evolution and mechanical performance in laser dissimilar welding of TC4 to SiCp/6092Al composite

In-situ TiC particles reinforced AA2219 Al-6.3Cu alloy joint via ultrasonic frequency double-pulsed arc

Influence of micron and nano SiCp on microstructure evolution and mechanical properties of laser metal deposition AlSi10Mg alloy

Microstructure evolution and fracture behavior of 2060 Al Li alloy by laser welding with TiC nanoparticle-reinforced filling wire

Microstructure evolution and mechanical properties of selective laser melting fabricated hybrid particle reinforced AlSi10Mg composites

Interfacial structures and strengthening mechanisms of in situ synthesized TiC reinforced Ti6Al4V composites by selective laser melting

Formation, microstructure, and performance of laser-welded 6061 Al alloy joint with Ti3AlC2 additive

Microstructure and mechanical properties of SiC reinforced AlSi10Mg composites fabricated by laser metal deposition

Dissimilar joining of TC4 and SiC p /6092Al matrix composite by laser lap welding technology

Microstructure, solidification behavior and mechanical properties of Al-Si-Mg-Ti/TiC fabricated by selective laser melting

Fabrication and characterization of SiC/Al composites prepared by laser powder bed fusion (LPBF) combined with vacuum pressure infiltration

Synergistic Strengthening Mechanisms of Dual-Phase (TiN+AlN) Reinforced Aluminum Matrix Composites Prepared by Laser Powder Bed Fusion