Abstract:This study introduces a brazing technique for joining Al0.3CoCrFeNi high-entropy alloy (HEA) utilizing a FeCoCrNiCu/Ti composite interlayer. The primary objectives of this investigation encompass an examination of the microstructure of the Al0.3CoCrFeNi joint, as well as an evaluation of the shear strength of the brazed joints under diverse brazing parameters. The characteristic microstructure of the Al0.3CoCrFeNi brazing seam is comprised of Ti (s, s), Cu (s, s) from the FeCoCrNiCu interlayer, and face-centered cubic (FCC) phases containing more than five elements. When the brazing temperature increases from 1100 degrees C to 1180 degrees C, there is a gradual augmentation in the diffusion of Ti element and subsequent reactions involving Cu, Ti, and Ni. Furthermore, the impact of holding time on the brazing seam is investigated. The findings suggest that prolonging the holding time has a relatively negligible effect on the reaction layer formed by the Ti foil. However, it does lead to a reduction of the Cu (s, s) content within the FeCoCrNiCu interlayer. Notably, the highest shear strength reaches up to 280 MPa when the joint brazed at 1160 degrees C for 10 min. In addition, the shear strength did not decrease below 800 degrees C. During the shear test, ductile fractures are observed in the joint, indicating favorable mechanical properties. Overall, this study successfully demonstrates the potential of the proposed brazing technique employing a FeCoCrNiCu/Ti composite interlayer for the effective joining of Al0.3CoCrFeNi HEA. By optimizing the brazing parameters, it is possible to achieve robust joints with exceptional mechanical characteristics.

Joining of C/C composite with high entropy alloy interlayers via spark plasma sintering and its mechanical strength at 1600 °C

Joining C/C composite in a few seconds using refectory high entropy alloy fillers via spark plasma sintering

Joining graphite with ZrHfNbTa and TiZrHfTa high entropy alloy interlayers by spark plasma sintering

Microstructure and Mechanical Properties of Cf/SiC Composite Joints Joined Using AlCoCrFeNi2.1 Eutectic High-Entropy Alloy Filler Via Spark Plasma Sintering

Microstructure and mechanical properties of C f /SiC composite joints joined using AlCoCrFeNi 2.1 eutectic high-entropy alloy filler via spark plasma sintering

Brazing SiC Ceramics and Zr with CoCrFeNiCuSn High Entropy Alloy

Joining of Cf/SiC composites using AlCoCrFeNi2.1 eutectic high‐entropy alloy filler by spark plasma sintering

An ultra-strength SiC ceramic joint with an in-situ formed high-entropy carbide interlayer via diffusion bonding by spark plasma sintering

Joining SiCf/SiC Composites to Al0.3CoCrFeNi High-Entropy Alloys with a Cu–Ti Filler Alloy: Interfacial Reactions, High-Entropy Effects, and Mechanical Properties

Inducing Low-Temperature Melting of TiNiCuNb Eutectic Alloy for Manufacturing Strong C/C-SiC Composite Joints

Joining silicon nitride ceramics with ZrSi2-SiC composite filler by spark plasma sintering

High-efficiency Joining of Cf/Al Composites and TiAl Alloys under the Heat Effect of Laser-ignited Self-propagating High-temperature Synthesis

Microstructure Evolution and Its Effect on the Mechanical Properties of the ZrC–SiC Composite Joint Diffusion Bonded with Pure Ni Foil

A new strategy of Al 0.1 CoCrFeNi high entropy alloys and Inconel 625 alloys joining technology

Pre-infiltration and brazing behaviors of Cf/C composites with high temperature Ti Si eutectic alloy

Fabrication and Characterisation of High-Performance Joints Made of ZrB2-SiC Ultra-High Temperature Ceramics

Obtaining In-Situ Reacted Fe–W–Ni–Cr–Cu High-Entropy Alloy Within the Interlayer of Dissimilar Cf/SiC-GH3536 Joint by Designing Non-High-entropy Cu–Ti–W Composite Filler

Microstructure and mechanical properties of C/C composite joint brazed with Ni-based filler

Microstructure and Mechanical Properties of Al0.3CoCrFeNi High-entropy Alloy Joints Brazed Using a FeCoCrNiCu/Ti Composite Interlayer

Interfacial Microstructure and Mechanical Properties of ZrB2SiC C Ceramic and GH99 Superalloy Joints Brazed with a Ti-modified FeCoNiCrCu High-Entropy Alloy

Achieving Interfacial Thermal Expansion Matching Between C/C Composites and Metal Through Ultrafast High-Temperature Shock (UHS)