Abstract:Developing high entropy alloys (HEAs) that possess both superior mechanical properties and low cost is a classic challenge in the design of alloys used in engineering applications. In this work, a series of Co-free AlxTi(9-x)(CrFeNi)91(x=0, 3, 6, and 9 at%, denoted as AlxTi(9-x) hereafter) HEAs were designed to investigate the influence of Al and Ti elements on the microstructure and mechanical properties of the FCC-structured CrFeNi alloy and pursue a considerable strength-plasticity balance. Massive precipitates with a nano-scale but different morphology and/or structure formed in the inter-dendritic region of alloys. The morphology of precipitates was strongly linked with the variation in the relative content of Al and Ti elements, which varied from a granular shape (ordered BCC structure) in Al9 and Al6Ti3 alloys to a strip shape (HCP structure) in Al3Ti6 alloy. With an increase (decrease) in Ti (Al) content, the yield strength of alloy significantly improved, which benefited from the combined effect of solution strengthening and precipitation strengthening, but the elongation dropped sharply. Compared to the same amount of Al element, Ti element contributed to the improvement of strength but deteriorated the plasticity of alloy. Thereinto, Al6Ti3 alloy presented a relatively favorable strength-plasticity balance with a yield strength of 768 MPa and an elongation of 10.2%. Apparently, only the moderate amount of Al and Ti elements helps to the favorable configuration of strength and plasticity. The findings in this work provide a distinct insight into the design and optimization of Co-free HEAs as the structural applications.

The microstructural evolution and enhanced mechanical properties of in-situ Ti(C, N)-reinforced CoCrFeNiTi high-entropy alloy composites fabricated via mechanical alloying and spark plasma sintering

In-situ development of Ti(C, N) and their effect on microstructure,wear and corrosion properties of CoCrFeNiTi high-entropy alloy matrix composites

Microstructural evolution and mechanical properties of novel nanoparticles strengthened CoCrFeNi based high entropy alloy

Microstructure and tensile properties of high-entropy alloy Al0.5CoCrFeNi particles reinforced Ti/Al laminated composite

Fabrication and Characterization of In-Situ Ti(C, N) - Cocrfeniti High Entropy Alloys Cermets

Effect of TiC addition on the microstructure and mechanical properties of FeCoCrNiMn high entropy alloy fabricated by selective laser melting

Enhanced tensile properties of CrMnFeCoNi0.8 high entropy alloy with in-situ TiC particles

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

Mechanical and thermal expansion behaviour of TiC-reinforced CoCrFeMnNi high entropy alloy prepared by mechanical alloying and spark plasma sintering

Boosted mechanical properties of CoCr3Fe5Ni high entropy alloy via in-situ TiC particles

Microstructure and mechanical properties of CrFeNi high-entropy alloy reinforced by Al and Ti elements

Microstructure and mechanical properties of Al-Fe-Co-Cr-Ni high entropy alloy fabricated via powder extrusion

Formation mechanism of interdiffusion layer and mechanical properties of Al 0.6 CoCrFeNi high-entropy alloy/Ti composites

Unveiling Enhanced Properties via Microstructural Evolution in Stir‐Cast Al6061 Composite Reinforced with AlCrFeNiTi High‐Entropy Alloy Particles.

Microstructure and mechanical properties of CrMnFeCoNi high entropy alloy/Al composite with different reinforcement content

Microstructure and bending behavior of Ti/Al laminated composites reinforced with high-entropy alloy particles

Microstructures and Tribological Properties of TiC Reinforced FeCoNiCuAl High-Entropy Alloy at Normal and Elevated Temperature

Achieving superior strength-ductility synergy by constructing network microstructure in Ti-based high-entropy alloy matrix composites

Synergistic strengthening of FeCrNiCo high entropy alloys via micro-TiC and nano-SiC particles

Insight of novel CoCrFeMnNi-Al 2 O 3p high entropy alloy matrix composites by mechanical alloying and spark plasma sintering

Effects of Ti addition and annealing on microstructure and mechanical properties of CoCrFeMnNi high-entropy alloy