Abstract:The design guided by entropy enables the attainment of superior mechanical properties and further extends the concept of high-entropy alloys to intermetallic systems, thus forming high-entropy intermetallic compounds and even high-entropy intermetallic matrix composites. In this study, a novel high-entropy intermetallic matrix composites incorporating in-situ hierarchical TiB 2 particles was successfully synthesized through the spark plasma sintering. This method enables precise control over the microstructure, ensuring uniform distribution of the in-situ formed TiB 2 particles within the high-entropy intermetallic matrix. The in-situ formation of TiB 2 particles is achieved through a reactive sintering mechanism, which not only contributes to the composite's enhanced mechanical properties but also ensures excellent bonding between the precipitates and intermetallic matrix. The composites were composed of the ordered L1 2 intermetallic matrix and the hierarchical hexagonal-close-packed TiB 2 particles. Due to the L1 2 intermetallic matrix and the heterogeneous distribution of TiB 2 reinforcement, the intermetallic matrix composites demonstrate a high ultimate tensile strength of ∼1400 MPa. The TiB 2 play a pivotal role in impeding the propagation of cracks and the collaborate with distinctive disordered interfaces at grain boundaries, ensuring enough ductility. The disordered interfaces, exhibiting an average width in the range of 5 nm to 10 nm, possess the capability to delay fracture and promote the strain-hardening rate during plastic deformation. The intermetallic matrix composites overcome the limitations typically associated with conventional intermetallics and offer an excellent strength and ductility balance. These findings are expected to formulate additional strategies for designing in-situ reinforcement-strengthened high-entropy intermetallic matrix composites with exceptional mechanical properties.

Achieving superior strength-ductility synergy by constructing network microstructure in Ti-based high-entropy alloy matrix composites

Tailoring A Novel Network Reinforcement Architecture Exploiting Superior Tensile Properties of in Situ Tibw/Ti Composites

IN SITU TiBW/Ti COMPOSITES WITH A NOVEL QUASI- CONTINUOUS NETWORK REINFORCEMENT ARCHITECTURE

Strength-ductility synergy of in-situ TiB/Ti6Al4V composites with tailored hierarchical TiB distributions

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Achieving strength-ductility combination and anisotropy elimination in additively manufactured TiB/Ti6Al4V by in-situ synthesized network architecture with fine grains

The microstructural evolution and enhanced mechanical properties of in-situ Ti(C, N)-reinforced CoCrFeNiTi high-entropy alloy composites fabricated via mechanical alloying and spark plasma sintering

Towards strength-ductility enhancement of titanium matrix composites through heterogeneous grain structured Ti matrix design

Excellent strength-ductility in Ti-alloyed Fe35Ni35Cr20Mn10 high-entropy alloy

Strength-ductility synergy in a novel carbon nanotube-high entropy alloy co-reinforced aluminum matrix composite

Simultaneous Improvement in Strength and Ductility of TC4 Matrix Composites Reinforced with Ti1400 Alloy and In Situ-Synthesized TiC

Achieving excellent strength-ductility synergy via high density dislocation and nano-twinning in cryo-rolled FeCoCrNiMo0.2 high-entropy alloy

Evading the strength and ductility trade-off dilemma in titanium matrix composites through designing bimodal grains and micro-nano reinforcements

Enhanced strength-ductility synergy via novel bifunctional nano-precipitates in a high-entropy alloy

Significant enhancement in comprehensive mechanical properties of Cr-Fe-Ni-Al-Si-Ti-Cu high-entropy alloy in as-cast state via C microalloying

Microstructure and mechanical properties of CrFeNi high-entropy alloy reinforced by Al and Ti elements

Break the strength and ductility trade-off in novel NbC reinforced Fe40.5(CoCr)25Mn17.5Ni10Si5 high entropy alloy

High strength and ductility high-entropy intermetallic matrix composites reinforced with in-situ hierarchical TiB 2 particles

Achieving high strength and ductility in high-entropy alloy particle reinforced Al matrix composites with proper proportion of layered structures

Simultaneously improving the strength and ductility of the as-sintered (TiB+La2O3)/Ti composites by in-situ planting ultra-fine networks into the composite powder

Enhanced tensile properties of CrMnFeCoNi0.8 high entropy alloy with in-situ TiC particles