Abstract:TiB was planted into the matrix titanium alloy through the rapid solidification process, and the new ultrafine network reinforced titanium matrix composites (TMCs) powder was formed. Based on the laser additive manufacturing technology, a new titanium matrix composite with alternate distribution of equiaxed network and columnar network structure were creatively fabricated, the formation mechanism of the network structure was systematically discussed, and the mechanical properties of the super-solidified TMCs by additive manufacturing were tested. The results indicate that the network structure (about 9 μm) of the additively manufactured TiB/Ti composites is mainly composed of in-situ nano-TiB whiskers, presenting two crystal structures of B27 and Bf. The direct introduction of B element is easy to form constitutional supercooling at the solidification interface. The equiaxed α phases are obtained by promoting the alternating formation of equiaxed/columnar network structure and refining the grain size. In addition, the formed nano-TiB network structure, not only inhibits the crack deflection and passivate cracks, but also confines the large number of slip lines inside the TiB network structure via in-situ observation, inducing high-density dislocations at the grain boundaries, which limites its plastic deformation, and greatly improves the strength of the composites. The additively manufactured TiB/Ti composites increases the tensile strength by 42%, and maintains the elongation of about 10%.

Tailoring A Novel Network Reinforcement Architecture Exploiting Superior Tensile Properties of in Situ Tibw/Ti Composites

IN SITU TiBW/Ti COMPOSITES WITH A NOVEL QUASI- CONTINUOUS NETWORK REINFORCEMENT ARCHITECTURE

High Temperature Tensile Properties of in Situ TiBw/Ti6Al4V Composites with a Novel Network Reinforcement Architecture

Room temperature tensile fracture characteristics of in situ TiBw/Ti6Al4V composites with a quasi-continuous network architecture

In situ (TiBw+TiCp)/Ti6Al4V composites with a network reinforcement distribution

In Situ TiBw/Ti–6Al–4V Composites with Novel Reinforcement Architecture Fabricated by Reaction Hot Pressing

Overcoming the strength-ductility trade-off dilemma in TiBw/TC18 composites via network architecture with trace reinforcement

Towards High Strengthening Efficiency by In-Situ Planting Nano-Tib Networks into Titanium Matrix Composites

Strength-ductility synergy of in-situ TiB/Ti6Al4V composites with tailored hierarchical TiB distributions

The Distribution of Reinforcements in Titanium Matrix Composites Enhanced with Graphene: from Dispersed to Networked

Achieving high performance in (NiTi<sub>2</sub> + TiC)/Ti composites with network architecture via reaction interface design

Synergistically Enhanced the Strength and Ductility of Network-Structured Titanium Matrix Composites Reinforced with B-containing Precursor-Derived TiB Nanowires

Microstructure and Mechanical Properties of Hybrid Reinforced (tibw+ticp)/ti60 Composites with Network Architecture

Network formation and mechanical property of additive manufactured TiB/Ti composites

Additive Manufacturing of (tib+tic)/ti6al4v Composites with Tailored Network Reinforcement Architecture

Controllable Two-Scale Network Architecture and Enhanced Mechanical Properties of (ti 5 Si 3 +tibw)/ti6al4v Composites

Constructing Micro-Network of Ti2Cu and In-Situ Formed TiC Phases in Titanium Composites As New Strategy for Significantly Enhancing Strength

Nanodiamonds reinforced titanium matrix nanocomposites with network architecture

Superplastic Tensile Characteristics of in Situ TiBw/Ti6Al4V Composites with Novel Network Microstructure

Simultaneous Enhancements of Strength, Ductility, and Toughness in a TiB Reinforced Titanium Matrix Composite

Improved Mechanical Properties in Titanium Matrix Composites: Controllable TiBw Distribution by Thermal Deformation Process