Abstract:A novel quasi-continuous network reinforced structure that consists of borides and carbides in B4C/TiAl matrix composites was innovatively designed for the strengthening at high temperatures. Simultaneously, impacts of such reinforced structures on microstructures and mechanical properties of the composites have been unveiled. TiAl matrix units in B4C/TiAl composites are duplex microstructures which are composed of (alpha 2+gamma) colonies and gamma grains. The ascent of B4C contents triggers off the formation of network reinforced structures in the layers of TiAl matrix units. With B4C contents increasing to 0.1 wt%, elasticity modulus and ultimate compressive strengths of B4C/TiAl composites are upgraded from 10.944 GPa and 723.10 MPa to 16.052 GPa and 774.611 MPa. As B4C contents reach at 5.0 wt%, elasticity modulus and ultimate compressive strengths further soar to 17.244 GPa and 799.19 MPa. Borides and carbides within the quasi-continuous network reinforced structures are unfolded as stripe and needle shaped TiB with B27 structure and Ti2AlC particles with MAX structure. Parts of Ti2AlC particles take TiB as cores to nucleate and grow. Moreover, TiC phases usually act as the cores for the nucleation of Ti2AlC particles. The orientation relationships of such reinforcements represent as [011]TiC// [010]TiB, (1-11)[011]TiC//(0006) [-2110]Ti2AlC, [100]TiB//[0001]Ti2AlC, [010]TiB//[-2110]Ti2AlC and [001]TiB// [01-10]Ti2AlC. The fractures of TiB are usually along or perpendicular to [010]TiB direction. Meanwhile, the fracture surfaces of TiB are always parallel to (100)TiB or (010)TiB planes. Additionally, dislocations slip through Ti2AlC particles and lead to separation and sliding of staking planes (0001)Ti2AlC within Ti2AlC lattices. TiB and Ti2AlC with alternative distribution can stabilize the network reinforced structures and upgrade properties of B4C/TiAl composites.

Tailoring martensitic transformation and mechanical properties of Ti–Ni composite reinforced by network structure of in-situ TiB and La2O3 phase

Tailoring A Novel Network Reinforcement Architecture Exploiting Superior Tensile Properties of in Situ Tibw/Ti Composites

The higher compressive strength (TiB+La2O3)/Ti–Ni shape memory alloy composite with the larger recoverable strain

IN SITU TiBW/Ti COMPOSITES WITH A NOVEL QUASI- CONTINUOUS NETWORK REINFORCEMENT ARCHITECTURE

High Temperature Tensile Properties of in Situ TiBw/Ti6Al4V Composites with a Novel Network Reinforcement Architecture

Effect of Spark Plasma Sintering Temperatures on Microstructure and Mechanical Properties of In-Situ (la2o3+tib)/ti2alnb Composites with a Tailored Three-Dimensional Network Architecture

Effect of Volume Fraction of Reinforcement on Microstructure and Mechanical Properties of In Situ (Ti, Nb)B/Ti2AlNb Composites with Tailored Three-Dimensional Network Architecture

Microstructure Evolution and Superelasticity Behavior of Ti-Ni-Hf Shape Memory Alloy Composite with Multi-Scale and Heterogeneous Reinforcements

3D Network Structure TiNNP/Ni Composite with High Tensile Strength and Ductility Simultaneously

Experimental verification and numerical analysis on plastic deformation and mechanical properties of the in-situ TiB2 homogeneous composites and TiB2/Cu network composites prepared by powder metallurgy

Towards High Strengthening Efficiency by In-Situ Planting Nano-Tib Networks into Titanium Matrix Composites

Simultaneously improving the strength and ductility of the as-sintered (TiB+La2O3)/Ti composites by in-situ planting ultra-fine networks into the composite powder

Network formation and mechanical property of additive manufactured TiB/Ti composites

Microstructures and Mechanical Properties of TiAl Matrix Composites with Multi-Precipitates Quasi-Continuous Network Reinforced Structures

Martensitic transformation and mechanical properties of Ti-Ni-Hf high temperature shape memory alloy with network structure second particles

Microstructure and mechanical behaviour of TiCx-MLG-TiCx network reinforced Ti6Al4V fabricated with core-shell structure powders

Microstructure evolution and mechanical properties of TC4/Ni metallic-intermetallic laminated composites: Formation and strengthening effects of Ti2Ni phases

Enhanced high temperature performance of two-scale network-structured (TiB+Ti5Si3)/TA15 composites by simultaneous adjustment of matrix and nano-scaled Ti5Si3

Network-Strengthened Ti-6Al-4V/(TiC+TiB) Composites: Powder Metallurgy Processing and Enhanced Tensile Properties at Elevated Temperatures

Controllable Two-Scale Network Architecture and Enhanced Mechanical Properties of (ti 5 Si 3 +tibw)/ti6al4v Composites

Strengthening and Plasticity Improvement Mechanisms of Titanium Matrix Composites with Two-Scale Network Microstructure