Abstract:TiB was planted into the matrix titanium alloy through the rapid solidification process, and the new ultrafine network reinforced titanium matrix composites (TMCs) powder was formed. Based on the laser additive manufacturing technology, a new titanium matrix composite with alternate distribution of equiaxed network and columnar network structure were creatively fabricated, the formation mechanism of the network structure was systematically discussed, and the mechanical properties of the super-solidified TMCs by additive manufacturing were tested. The results indicate that the network structure (about 9 μm) of the additively manufactured TiB/Ti composites is mainly composed of in-situ nano-TiB whiskers, presenting two crystal structures of B27 and Bf. The direct introduction of B element is easy to form constitutional supercooling at the solidification interface. The equiaxed α phases are obtained by promoting the alternating formation of equiaxed/columnar network structure and refining the grain size. In addition, the formed nano-TiB network structure, not only inhibits the crack deflection and passivate cracks, but also confines the large number of slip lines inside the TiB network structure via in-situ observation, inducing high-density dislocations at the grain boundaries, which limites its plastic deformation, and greatly improves the strength of the composites. The additively manufactured TiB/Ti composites increases the tensile strength by 42%, and maintains the elongation of about 10%.

Study on the Preparation of Network Ti-N/Ti Composites by Nitridation of Ti Powders

Tailoring A Novel Network Reinforcement Architecture Exploiting Superior Tensile Properties of in Situ Tibw/Ti Composites

IN SITU TiBW/Ti COMPOSITES WITH A NOVEL QUASI- CONTINUOUS NETWORK REINFORCEMENT ARCHITECTURE

In situ (TiBw+TiCp)/Ti6Al4V composites with a network reinforcement distribution

Fabrication and mechanical properties of Ti2AlN/TiAl composite with continuous network structure

Preparation and properties of TiN–Si3N4 composites

Towards High Strengthening Efficiency by In-Situ Planting Nano-Tib Networks into Titanium Matrix Composites

Microstructural Characteristics and Evolution of Ti2AlN/TiAl Composites with a Network Reinforcement Architecture During Reaction Hot Pressing Process

3D Network Structure TiNNP/Ni Composite with High Tensile Strength and Ductility Simultaneously

In-situ synthesis and superhigh modulus of network structured TiC/Ti composites based on diamond-Ti system

Tailoring martensitic transformation and mechanical properties of Ti–Ni composite reinforced by network structure of in-situ TiB and La2O3 phase

Microstructure and Mechanical Properties of As-Cast Ti-N Alloy

Network formation and mechanical property of additive manufactured TiB/Ti composites

Simultaneously Enhancing the Strength and Ductility in Titanium Matrix Composites Via Discontinuous Network Structure

An Enhanced Strength Ni Matrix Composite Reinforced by a 3D Network Structure of TiN Nano-Particles

Multifunctional BN/Si3N4 and TiN/Si3N 4 nanocomposites prepared by in-situ nitridation method

Heterogeneous network structures formed in TiC/TC4/β-Ti composites for enhancing both strength and ductility

Preparation and organization of W-Ni/TiC composite material

Production of Iron Matrix Composite Reinforced by TiN Particulate Through Nitriding by Powder Metallurgy

Microstructure and Mechanical Properties of the TiN Particles Reinforced IN718C Composite