Abstract:NiAl intermetallics is considered to be a potential high temperature structural material based on a high melting point, low density, high thermal conductivity, excellent oxidation and hot-corrosion resistance at elevated temperatures [1–4], but its high temperature strength is insufficient for the majority of actual applications. The tensile ductility and fracture toughness at ambient temperatures are often also unsatisfactory [5, 6]. The solid solution strengthening, precipitation strengthening, directional solidification and single crystal technique have been explored to improve its high temperature strength. Although significant progress has been achieved, the ambient tensile ductility and fracture toughness often deteriorate as a result. On the other hand, the ductility and toughness can also be improved by microalloying, macroalloying and plastic secondary phase additions, but this is at the expense of the strength [4–7]. In other words, it is very difficult to compromise its high temperature strength and ambient temperature ductility. This severely restricts its operating temperature and deteriorates its machinability. It is significant to explore novel fabricaturing techniques for NiAl intermetallic alloy to improve its comprehensive mechanical properties. Preparing intermetallic matrix composite is an effective method to produce engineering NiAl intermetallic alloy and to improve its high temperature strength and retain ambient temperature ductility simultaneously [8, 9]. Good ductility can be obtained through adequately alloying the intermetallic matrix while the strength is improved with the reinforcements. The casting, combustion synthesis, powder metallurgy and mechanical alloying are major methods for preparing NiAl intermetallic matrix composites. Nevertheless, in many cases, the mechanical bonding due to no interfacial reaction, or the brittle reactive products existing at the interface between matrix and reinforcement due to excessive interfacial reaction often result in weak interfacial bonding so that whole properties

Production of Iron Matrix Composite Reinforced by TiN Particulate Through Nitriding by Powder Metallurgy

In Situ Preparation of (tib + TiC + Nd2O3)/Ti Composites by Powder Metallurgy

Study on the Preparation of Network Ti-N/Ti Composites by Nitridation of Ti Powders

In Situ Fabrication of Titanium Carbide Particulates-Reinforced Iron Matrix Composites

Preparation of Ti/Al based nanophase composite powder by mechanical alloying

Novel titanium matrix composites reinforced by NiCoCr medium entropy particles

Preparation of ti-al based nanophase composite powder by mechanical alloying

Mechanical Alloying and Spark Plasma Sintering of Ni-Al-Ti-B Powders for Fabricating Nanocrystailine (Tib+tib2)/ni-3(Al, Ti) Composite

Preparation of Nanometer Size TiC Particulate Reinforcements in Ti Matrix Composites under High Pressure

Direct Laser Fabricated in Situ TiC Particulate Reinforced Ni30Al20Fe Intermetallic Matrix Composite

Microstructure and Mechanical Properties of As-Cast Ti-N Alloy

Preparation and properties of TiN–Si3N4 composites

Study on NbC Particulate-Reinforced Iron Matrix Composite Produced in Situ

Microstructural Characteristics and Evolution of Ti2AlN/TiAl Composites with a Network Reinforcement Architecture During Reaction Hot Pressing Process

Formation mechanism of the TiN containing coating on the Al2O3-Ti2O3 composite at 1400°C nitrogen-blowing

Synthesis of TiN/Ti3Al composite coatings on Ti6Al4V alloy by plasma spraying and laser nitriding

Preparation of Si3N4–TiN–SiC composite by partial substitution of Ti–Si–Fe alloy for Si under N2 atmosphere

A New Design of In-situ Ti(C,N) Reinforced Composite Coatings and Their Microstructures, Interfaces and Wear Resistances.

Infiltration Casting and in Situ Fabrication of NbC Particulates – Reinforced Iron Matrix Composites

In Situ Synthesis of Tin/Ti3al Intermetallic Matrix Composite Coatings on Ti6al4v Alloy

In-situ nitridation synthesis of TiN-Al2O3 composite nanopowders