Abstract:Composite structure design is an important way to improve reinforcement strengthening efficiency. The dispersion of the external reinforcement is often not uniform enough, however, and it is agglomerated in the matrix, which cannot uniformly and effectively bear the load. The interconnected reinforcement network prepared by the in-situ self-growth method is expected to obtain higher material properties. In this paper, the TiN shell was formed on the surface of Ti powder by the in-situ nitriding method, and then the network TiN/Ti composites were prepared by sintering. In the control group, TiN was dispersed by mechanical ball milling, and it was found that TiN powder was coated on the surface of Ti particles, and the sintered TiN/Ti composites formed a discontinuous structure with a great deal of TiN agglomeration. A uniform TiN nitride layer of 5~7 μm was formed on the surface of Ti powder by the in-situ nitriding method, and a connected TiN network was formed in the sintered Ti-N/Ti composites. The composites prepared by nitriding have higher compressive strength, hardness, and plasticity. The hardness of the Ti-N/Ti composite is 685.7 HV and the compressive strength is 1468.5 MPa. On this basis, the influence of the connected TiN structure on the material properties was analyzed, which provided theoretical guidance for the structural design of the network structure-reinforced titanium matrix composites.

SYNTHESIS OF T-Zro2-tin COMPOSITE NANOPOWDERS BY SELECTIVE NITRIDATION

Preparation of ti-al based nanophase composite powder by mechanical alloying

Preparation of Ti/Al based nanophase composite powder by mechanical alloying

Synthesis of Nanopowders of Titanium Nitride by In-Situ Nitridation of Titanium Oxide

Preparation of ZrN Nanopowders by Internal Gelation and Carbothermic Nitridation

Preparation and Properties of CaTiO_3:Zn Nanoparticles Based on Sol-Gel Method

Synthesis and Characterization of Zirconium Nitride Nanopowders by Internal Gelation and Carbothermic Nitridation

Synthesis of Uniform Titanium Nitride Nanocrystalline Powders Via a Reduction–Hydrogenation–Dehydrogenation–Nitridation Route

Combustion Synthesis of Tinxc1-X Powders with Ultra Fine Particle Size by Using Titanium Oxide As Dilution

Synthesis and Formation Mechanism of W/TiC Composite Powders by a Wet Chemical Route

Research on preparation process for the in situ nanosized Zr(Y)O2 particles dispersion-strengthened tungsten alloy through synthesizing doped hexagonal (NH4)0.33·WO3

SYNTHESIS OF ALUMINUM NITRIDE POWDER BY IN SITU REACTION

Production of Iron Matrix Composite Reinforced by TiN Particulate Through Nitriding by Powder Metallurgy

Preparation of nano-TiN powders by Ni-catalysed carbothermal reduction nitridation

Efficient and cost-effective method to synthesize highly purified Ti4AlN3 and Ti2AlN

Low-Temperature Synthesis of Titanium Oxynitride Nanoparticles

Study on the Preparation of Network Ti-N/Ti Composites by Nitridation of Ti Powders

Preparation of Zirconia Base Solid Solution Nanopowder by Exothermal Solid-State Synthesis

Characterization and Synthesis of Pure Zro2 Nanopowders Via Sonochemical Method

Composite ceramic coating with enhanced thermal shock resistance formed by the in-situ synthesis of nano-ZrO2

Synthesis of Ordered Hexagonal Porous Tin-Doped Zirconium Oxides with a High Surface Area