Abstract:Presented is a study on the original preparation of individual and in situ intimately mixed composite nanocrystalline powders in the titanium nitride-aluminum nitride system, Ti:Al = 1:1 (at.), which were used in high pressure (7.7 GPa) and high temperature (650 and 1200 °C) sintering with no binding additives for diverse individual and composite nanoceramics. First, variations in precursor processing pathways and final nitridation temperatures, 800 and 1100 °C, afforded a pool of mixed in the nanosized regime cubic TiN (c-TiN) and hexagonal AlN (h-AlN) composite nanopowders both with varying average crystallite sizes. Second, the sintering temperatures were selected either to preserve initial powder nanocrystallinity (650 °C was lower than both nitridation temperatures) or promote crystal growth and recrystallization (1200 °C was higher than both nitridation temperatures). Potential equilibration towards bimetallic compounds upon solution mixing of the organometallic precursors to nanopowders, monomeric Ti[N(CH3)2]4 and dimeric {Al[N(CH3)2]3}2, was studied with 1H and 13C NMR in C6D6 solution. The powders and nanoceramics, both of the composites and individual nitrides, were characterized if applicable by powder XRD, FT-IR, SEM/EDX, Vicker's hardness, and helium density. The Vicker's hardness tests confirmed many of the composite and individual nanoceramics having high hardnesses comparable with those of the reference h-AlN and c-TiN ceramics. This is despite extended phase segregation and, frequently, closed microsized pore formation linked mainly to the AlN component. No evidence was found for metastable alloying of the two crystallographically different nitrides under the applied synthesis and sintering conditions. The high pressure and high temperature sintering of the individual and in situ synthesis-mixed composite nanopowders of TiN-AlN was demonstrated to yield robust nanoceramics.

Efficient and cost-effective method to synthesize highly purified Ti4AlN3 and Ti2AlN

Efficient and cost-effective method to synthesize highly purified Ti<sub>4</sub>AlN<sub>3</sub> and Ti<sub>2</sub>AlN

A novel simple method to stably synthesize Ti3AlC2 powder with high purity

Preparations of Titanium Nitride, Titanium Carbonitride and Titanium Carbide Via a Two-Step Carbothermic Reduction Method

Preparation of ti-al based nanophase composite powder by mechanical alloying

Synthesis of Ultrafine AlN Powders in an Al-OC-N System

Hydrothermal-carbothermal synthesis of highly sinterable AlN nanopowders

Synthesis and characterization of nanocrystalline Ti(1-x)Al(x)N by reactive magnetron sputtering

SYNTHESIS OF ALUMINUM NITRIDE POWDER BY IN SITU REACTION

Pressureless manufacturing of high purity Ti3AlC2 MAX phase material: Synthesis and characterisation

Synthesis of Aluminium Nitride by Direct Nitridation of Molten Al-Mg-Si Alloys

Synthesis of Aluminum Nitride Nanocrystals and Platelets

Composite Nitride Nanoceramics in the System Titanium Nitride (TiN)-Aluminum Nitride (AlN) through High Pressure and High Temperature Sintering of Synthesis-Mixed Nanocrystalline Powders

Preparation of Single-Phase Ti2AlN Coating by Magnetron Sputtering with Cost-Efficient Hot-Pressed Ti-Al-N Targets

In-situ Synthesis of TiN and its Effects on Fe-12Cr-6Al in Laser Powder Bed Fusion

Formation of iron nitride thin films with Al and Ti additives

Synthesis of Nanopowders of Titanium Nitride by In-Situ Nitridation of Titanium Oxide

Low-Temperature Synthesis of Titanium Oxynitride Nanoparticles

Modification mechanism of Ti-6Al-4V alloy with pre-coated Ti-Cu-Al multilayer film treated by ion nitriding: Experiments and first-principles calculations

Synthesis Of High-Purity Powder Ti3alc2 Materials By Pressureless Sintering

Fabrication of Ti<sub>3</sub>AlC<sub>2</sub> Powder with High-Purity by Pressureless Sintering