Abstract:A novel quasi-continuous network reinforced structure that consists of borides and carbides in B4C/TiAl matrix composites was innovatively designed for the strengthening at high temperatures. Simultaneously, impacts of such reinforced structures on microstructures and mechanical properties of the composites have been unveiled. TiAl matrix units in B4C/TiAl composites are duplex microstructures which are composed of (alpha 2+gamma) colonies and gamma grains. The ascent of B4C contents triggers off the formation of network reinforced structures in the layers of TiAl matrix units. With B4C contents increasing to 0.1 wt%, elasticity modulus and ultimate compressive strengths of B4C/TiAl composites are upgraded from 10.944 GPa and 723.10 MPa to 16.052 GPa and 774.611 MPa. As B4C contents reach at 5.0 wt%, elasticity modulus and ultimate compressive strengths further soar to 17.244 GPa and 799.19 MPa. Borides and carbides within the quasi-continuous network reinforced structures are unfolded as stripe and needle shaped TiB with B27 structure and Ti2AlC particles with MAX structure. Parts of Ti2AlC particles take TiB as cores to nucleate and grow. Moreover, TiC phases usually act as the cores for the nucleation of Ti2AlC particles. The orientation relationships of such reinforcements represent as [011]TiC// [010]TiB, (1-11)[011]TiC//(0006) [-2110]Ti2AlC, [100]TiB//[0001]Ti2AlC, [010]TiB//[-2110]Ti2AlC and [001]TiB// [01-10]Ti2AlC. The fractures of TiB are usually along or perpendicular to [010]TiB direction. Meanwhile, the fracture surfaces of TiB are always parallel to (100)TiB or (010)TiB planes. Additionally, dislocations slip through Ti2AlC particles and lead to separation and sliding of staking planes (0001)Ti2AlC within Ti2AlC lattices. TiB and Ti2AlC with alternative distribution can stabilize the network reinforced structures and upgrade properties of B4C/TiAl composites.

Fabrication and mechanical properties of Ti2AlN/TiAl composite with continuous network structure

Study on the Preparation of Network Ti-N/Ti Composites by Nitridation of Ti Powders

Microstructural Characteristics and Evolution of Ti2AlN/TiAl Composites with a Network Reinforcement Architecture During Reaction Hot Pressing Process

Fabrication of in Situ Ti 2 AlN/TiAl Composites by Reaction Hot Pressing and Their Properties

Effect of spark plasma sintering temperature on the multi-scale microstructure evolution and mechanical properties of Ti 2 AlC/TiAl composites with network architecture

The Fabrication and Properties of the Squeeze-Cast TiN/Al Composites

The Mechanical Properties and Fracture Characteristics of AlN/Ti Laminated Composites

Microstructures and enhanced mechanical properties of (Al3Ti+Al2O3)/Al–Si composites with co-continuous network structure prepared by pressure infiltration

Microstructure and Mechanical Properties of As-Cast Ti-N Alloy

Microstructures and Mechanical Properties of TiAl Matrix Composites with Multi-Precipitates Quasi-Continuous Network Reinforced Structures

3D Network Structure TiNNP/Ni Composite with High Tensile Strength and Ductility Simultaneously

Fabrication, microstructure and mechanical properties of TiAl matrix composite reinforced by submicro/nano-Ti 2 AlC

Effect of Spark Plasma Sintering Temperatures on Microstructure and Mechanical Properties of In-Situ (la2o3+tib)/ti2alnb Composites with a Tailored Three-Dimensional Network Architecture

Network formation and mechanical property of additive manufactured TiB/Ti composites

Tailoring martensitic transformation and mechanical properties of Ti–Ni composite reinforced by network structure of in-situ TiB and La2O3 phase

Microstructure evolution, mechanical properties, and strengthening mechanisms of heat-resistant Al-based composite reinforced by a combination of AlN and TiN particles

Mechanical Alloying and Spark Plasma Sintering of Ni-Al-Ti-B Powders for Fabricating Nanocrystailine (Tib+tib2)/ni-3(Al, Ti) Composite

Fabrication and Fracture Characteristics of AlN/Ni Laminated Composites

Manufacture and Properties of AlON-TiN Particulate Composites

Microstructure characterization and enhanced mechanical properties of quasi-continuous network structured Ti3AlC2-Al3Ti/2024Al composite