Abstract:Titanium matrix composites reinforced with titanium boride (TiB) and titanium carbide (TiC) were fabricated in situ via selective laser melting (SLM). Varying contents of boron carbide (B4C) from 0 to 5 wt% were added to pure Ti to prepare blended powders for SLM. The influence of the B4C content on the printability, microstructure and mechanical properties of SLM-printed (TiB + TiC)/Ti composites was studied. The relative densities of all the fabricated composites were greater than 97.8 %; an increase in the B4C content resulted in a decrease in their relative density. The microstructure of the composites varied from a lath-shaped structure (0 wt%) to a dendritic structure (1 wt%) and to a cellular + dendritic structure (2–5 wt%), which was determined by the change of thermal convection within melt pools. Both the dendritic and cellular structures were arranged by coalescent clusters composed of TiB whiskers and TiC particles, while the clusters were formed through a self-joining behavior of the TiB whiskers that were mechanically locked with the TiC particles. The composites with the addition of 1 wt% B4C exhibited the highest ultimate tensile strength of 946 MPa, yield strength of 762 MPa and elastic modulus of 128 GPa, which were 62.4 %, 49.2 % and 15.3 % higher than those of the Ti matrix, respectively. The remarkable enhancement in the mechanical strengths was attributed to the synergistic effect of dispersion strengthening and grain refinement strengthening. The (TiB + TiC)/Ti composites fabricated in situ by SLM with an optimized material formulation not only ensured comparable mechanical properties to those of their counterparts manufactured by conventional processes but also demonstrated the potential in manufacturing complex and/or customized parts with design freedom for industrial applications.

TiB Whisker and Nitrogen Solid‐Solution Synergistic‐Strengthened Titanium Matrix Composites by Ti–BN via Spark Plasma Sintering and Hot Extrusion

IN SITU TiBW/Ti COMPOSITES WITH A NOVEL QUASI- CONTINUOUS NETWORK REINFORCEMENT ARCHITECTURE

Tailoring A Novel Network Reinforcement Architecture Exploiting Superior Tensile Properties of in Situ Tibw/Ti Composites

Fabrication and Tensile Properties of in Situ TiBw and TiCp Hybrid-Reinforced Titanium Matrix Composites Based on Ti–B4C–C

Synergistically Enhanced the Strength and Ductility of Network-Structured Titanium Matrix Composites Reinforced with B-containing Precursor-Derived TiB Nanowires

Simultaneous Enhancements of Strength, Ductility, and Toughness in a TiB Reinforced Titanium Matrix Composite

TiB Nano-Whiskers Reinforced Titanium Matrix Composites with Novel Nano-Reticulated Microstructure and High Performance Via Composite Powder by Selective Laser Melting

Microstructure and mechanical properties of GNPs and in-situ TiB hybrid reinforced Ti–6Al–4V matrix composites with 3D network architecture

Microstructure and Mechanical Properties of Cu Matrix Composites Reinforced by TiB2/TiN Ceramic Reinforcements

Microstructure and tensile properties of in situ synthesized (TiBw + TiCp)/Ti6242 composites

Effect of TiB2 content on microstructure and properties of in situ Ti-TiB composites

Microstructure and Tensile Properties of in Situ (tib+tic)/ti6242 (tib:Tic=1:1) Composites Prepared by Common Casting Technique

Microstructure and superior mechanical property of in situ (TiBw + TiCp)/Ti composites with laminated structure

Effect of Volume Fraction of Reinforcement on Microstructure and Mechanical Properties of In Situ (Ti, Nb)B/Ti2AlNb Composites with Tailored Three-Dimensional Network Architecture

In-situ synthesized TiC/Ti-6Al-4V composites by elemental powder mixing and spark plasma sintering: Microstructural evolution and mechanical properties

Microstructure and strengthening mechanism of boride in-situ reinforced titanium matrix composites prepared by plasma activated sintering

Microstructure and Mechanical Properties of in Situ Synthesised (Tic+tib)/ti-6Al-4v Composites Prepared by Powder Metallurgy

Microstructure and Mechanical Properties of Ti-TiBw-x%Cu Composites by Powder Metallurgy Using Atomized Ti-TiBw Powder As Raw Materials

Microstructure and Mechanical Behaviors of Titanium Matrix Composites Containing In Situ Whiskers Synthesized via Plasma Activated Sintering

Microstructure, densification and mechanical properties of in situ TiBw/Ti2AlNb composites fabricated by spark plasma sintering

Microstructure and mechanical properties of (TiB+TiC)/Ti composites fabricated in situ via selective laser melting of Ti and B4C powders