Abstract:High-performance (Ti, Nb)B/Ti2AlNb composites are promising high-temperature structural materials for the new generation of aerospace engines. The interfaces between the (Ti, Nb)B reinforcement and matrix phases (i.e. O-Ti2AlNb, α2-Ti3Al and B2 phases) affect the mechanical properties of the composites largely. In this study, the properties of the interfaces were systematically revealed after fabricating a (Ti, Nb)B/Ti2AlNb composite by low-energy ball-milling and spark plasma sintering (SPS). A high-resolution transmission electron microscopy (HRTEM) was adopted to evaluate the crystallographic orientation relationships (ORs) and interfacial structures. (Ti, Nb)B maintains three coherent interfaces with the matrix, and the preferred ORs between them can be expressed as [1 1 <math>2¯</math> 0]α2//[0 1 0](Ti, Nb)B and (<math>1¯</math> 1 0 0)α2//(1 0 0)(Ti, Nb)B; [1 <math>1¯</math> 0]O//[0 1 0](Ti, Nb)B and (1 1 0)O//(1 0 0)(Ti, Nb)B; [1 <math>1¯</math> 1]B2//[0 1 0](Ti, Nb)B and (<math>1¯</math> 1 2)B2//(1 0 0)(Ti, Nb)B. The results of first-principles calculations indicated that the (<math>1¯</math> 1 0 0)α2/(1 0 0)(Ti, Nb)B interface possesses a higher bonding strength compared with the (1 1 0)O/(1 0 0)(Ti, Nb)B and (<math>1¯</math> 1 2)B2/(1 0 0)(Ti, Nb)B interfaces, and the (Ti, Nb)B reinforcement and the matrix are bonded through strong ionic bonds and weak covalent bonds. Moreover, based on Bramfitt's lattice mismatch theory, it was found that the (Ti, Nb)B reinforcement acts as an effective substrate in promoting the heterogeneous nucleation and preferred precipitation of the α2 phase. Suppressing the brittle α2 precipitate around the reinforcement improves the ductility of the composite obviously.

Boron nitride nanosheets as precursors for 3D nano-configurations in titanium matrix composites: interfacial evolution and mechanical behavior

Tailoring A Novel Network Reinforcement Architecture Exploiting Superior Tensile Properties of in Situ Tibw/Ti Composites

Synergistically Enhanced the Strength and Ductility of Network-Structured Titanium Matrix Composites Reinforced with B-containing Precursor-Derived TiB Nanowires

Achieving high strength-ductility in TiBw-GNPs/Ti6Al4V composites via 3D interface configuration

TiB Whisker and Nitrogen Solid‐Solution Synergistic‐Strengthened Titanium Matrix Composites by Ti–BN via Spark Plasma Sintering and Hot Extrusion

Crystallographic orientation relationships and interfacial structures between reinforcement and matrix phases in an in situ (Ti, Nb)B/Ti2AlNb composite

Strength-toughness Combination in Nickel Matrix Composites Reinforced by Hybrid Graphene Nanoplatelets-Titanium Diboride

Effects of carbon nanomaterials on interfacial structure and mechanical properties of high temperature Ti matrix composites

Simultaneously Enhancing the Strength and Ductility in Titanium Matrix Composites Via Discontinuous Network Structure

Construction of Three-Dimensional Network Morphology Titanium Matrix Composites Via Adding Nano B4C: As-built and Heat-Treated Scenarios

Embedding Boron into Ti Powder for Direct Laser Deposited Titanium Matrix Composite: Microstructure Evolution and the Role of Nano-Tib Network Structure

Effect of Volume Fraction of Reinforcement on Microstructure and Mechanical Properties of In Situ (Ti, Nb)B/Ti2AlNb Composites with Tailored Three-Dimensional Network Architecture

Strengthening and Toughening Mechanisms of Mg Matrix Composites Reinforced with Specific Spatial Arrangement of In-Situ TiB2 Nanoparticles

Configuration Design and Fabrication of Laminated Titanium Matrix Composites

Simultaneous Enhancements of Strength, Ductility, and Toughness in a TiB Reinforced Titanium Matrix Composite

Towards High Strengthening Efficiency by In-Situ Planting Nano-Tib Networks into Titanium Matrix Composites

Interfacial/intragranular reinforcement of titanium-matrix composites produced by a novel process involving core-shell structured powder

Microstructure Evolution and Mechanical Properties of Selective Laser Melted Bulk-Form Titanium Matrix Nanocomposites with Minor B4C Additions

Microstructure and mechanical properties of GNPs and in-situ TiB hybrid reinforced Ti–6Al–4V matrix composites with 3D network architecture

An Investigation of Microstructural Evolution, Tensile Properties and Work-Hardening Behavior of Nanosized TiB2/Al-Cu-Mn Composites

Effect of BNNTs/matrix interface tailoring on toughness and fracture morphology of hierarchical SiCf/SiC composites