Abstract:This study examines the role of nano B4C addition in improving the mechanical properties of Ti-6Al-4V (Ti64) alloys fabricated by laser melting deposition under as-built and heat-treated conditions. However, the enrichment of reinforcing phases generated by in situ production at grain boundaries causes a serious reduction in ductility, limiting the development of high-performance titanium matrix composites. To avoid this deficiency, the fabricated titanium matrix composites (TMCs) were subjected to three different heat treatment programmers, namely, subtransus heat treatment, supertransus heat treatment and triple heat treatment. The effects of B4C addition and heat treatment on microstructure, texture and mechanical properties were systematically investigated. The results show that TiB and TiC, synthesized in situ, promote the precipitation of α-Ti with a non-Burgess orientation relationship, and weakening the texture intensity of α-Ti. The ultimate tensile strength of the in situ synthesized (TiB + TiC) reinforced Ti64 composites is 1168 MPa, which is 35.5% higher than the ultimate tensile strength of the Ti64 alloys. However, this effect resulted in a decrease in elongation at break to 2.5%. An excellent combination of strength and fracture strain of 1060 MPa and 9.3 %, respectively, was simultaneously achieved for the heat-treated TMCs. The excellent ductility is mainly attributed to the microstructure consisting of primary equiaxed-α, ultrafine αs lamellar and retained β phase has been obtained after triple heat treatment. This finding offers significant guidance for the additive manufacturing of TMCs microstructures in order to attain the desired mechanical properties.

Interfacial/intragranular reinforcement of titanium-matrix composites produced by a novel process involving core-shell structured powder

Tailoring A Novel Network Reinforcement Architecture Exploiting Superior Tensile Properties of in Situ Tibw/Ti Composites

IN SITU TiBW/Ti COMPOSITES WITH A NOVEL QUASI- CONTINUOUS NETWORK REINFORCEMENT ARCHITECTURE

Microstructure and Wear-resistant Properties of in situ TiB-TiC Reinforced Titanium Matrix Composites by Laser Deposition Manufacturing

Superior strength-ductility combination in TiC/TC4 composites via In situ construction Ti 2 Cu nanoparticles

Optimization of the mechanical properties of CNTs/Cu composite by regulating the size of interfacial TiC

Laser powder bed fusion additive manufacturing, microstructure evolution, and mechanical performance of carbon nanotube-decorated titanium alloy powders

Regulating the mechanical properties and electrical conductivity of CNTs/Cu composites by tailoring nano-sized TiC on the surface of intact CNTs

High mechanical strengthened CNTs/Al composite concepts with robust interface and intragranular reinforcement achieved via interfacial thermite reaction

Constructing micro-network of Ti 2 Cu and in-situ formed TiC phases in titanium composites as new strategy for significantly enhancing strength

Achieving high combination of strength and ductility of Al matrix composite via in-situ formed Ti-Al3Ti core-shell particle

Improvement of interfacial interaction and mechanical properties in aluminum matrix composites reinforced with Cu-coated carbon nanotubes

Synergistic strengthening behavior and microstructural optimization of hybrid reinforced titanium matrix composites during thermomechanical processing

Preparation of in situ TiC@TiN core–shell and Ti2N–Al4C3 nanoparticles and their effects on Al–Zn–Mg–Cu alloy

Strengthening and Toughening Mechanisms of Mg Matrix Composites Reinforced with Specific Spatial Arrangement of In-Situ TiB2 Nanoparticles

Construction of Three-Dimensional Network Morphology Titanium Matrix Composites Via Adding Nano B4C: As-built and Heat-Treated Scenarios

Effectively enhanced strength by interfacial reactions in in-situ carbon reinforced Al matrix composites

Preparation and toughness mechanism of in-situ Ti3AlC2 enhanced and toughened TiAl3 matrix composites

Simultaneous Improvement in Strength and Ductility of TC4 Matrix Composites Reinforced with Ti1400 Alloy and In Situ-Synthesized TiC

Enhancement of mechanical properties and conductivity in carbon nanotubes (CNTs)/Cu matrix composite by surface and intratube decoration of CNTs

Effect of Active Powder Addition on the Mechanical Properties of TiCp/Manganese Steel Matrix Composites