Enhanced properties of titanium matrix composites via in-situ synthesized TiCx and Ti 5 Si 3 with network structure

Xinjian Cao,Xiao Liu,Haibin Zhou,Yunqi Guo,Zhongkan Ren,Jie Guo,Xia Li,Jun Yang

DOI: https://doi.org/10.1016/j.matchemphys.2023.128849

IF: 4.778

2023-12-24

Materials Chemistry and Physics

Abstract:In-situ network-structured (TiCx + Ti 5 Si 3 )/TC4 composites were fabricated via a low-energy ball mill and hot-pressing sintering based on the reaction between Ti 3 SiC 2 and Ti. The microstructure evolution, mechanical properties, and tribological behavior of the composites with different amounts of Ti 3 SiC 2 were studied. The experimental results show that the microstructure of the matrix transforms into the equiaxed structure with the addition of Ti 3 SiC 2 . The in-situ TiCx particles are mainly distributed around the matrix and form a network structure, as the Ti 3 SiC 2 content is 5 vol%. Compared with neat TC4, the hardness, tensile strength, and wear resistance of the composites can be significantly enhanced. Moreover, the composite with 5 vol% Ti 3 SiC 2 displays excellent comprehensive properties. The tensile strength of the composite is 1165 MPa, increased by 34.7 % over the neat TC4 and its elongation reaches 8.5 %. Meanwhile, the wear rate of the composite decreases to 24.5 × 10 −5 mm 3 /(N·m), which is reduced by 16.7 % compared with the neat TC4. It is worth noting that the aggregation of particles can seriously reduce the mechanical properties of the composites.

materials science, multidisciplinary