Abstract:The effect of titanium-alloying on microstructure and mechanical properties of Fe35Ni35Cr20Mn10 high-entropy alloy (HEA) was studied. The microstructure was characterized by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The mechanical properties were examined by tensile and hardness tests. After the homogenization treatment at 1000 °C for 12 h, a great amount of thick/thin η flakes are observed to form at the grain boundaries, regularly intersect-arraying with specific directions that form η-locks. It is found that both the thick and thin η-Ni 3 Ti flakes are well coherent with face-centered cubic (FCC) matrix. Ti-alloying makes the homogenized Fe35Ni35Cr20Mn10 HEA possess high yield strength (331 MPa) and excellent ductility (47.2% in elongation), exhibiting a better strength-ductility. The remarkable rise in yield strength is from fine grain strengthening, dislocation hardening and second phase strengthening that are induced by Ti alloying. The refinement of grains induced by Ti alloying, the formation of a number of clear dislocation cells in FCC matrix and many stacking faults in FCC matrix and inside η flakes during the tensile deformation, and especially the coordinated deformation between η flakes and matrix, are thought to be responsible for the excellent ductility. The excellent strength-ductility in homogenized (Fe35Ni35Cr20Mn10) 95.3 Ti 4.7 HEA is, more importantly, due to the formation of regular intersect-arraying of η flakes (η-locks) with specific directions. The thick/thin η flakes are all along keeping the coherent relationship with FCC matrix during the total tensile deformation and hence can coordinately deform with the matrix.

Boosted mechanical properties of CoCr3Fe5Ni high entropy alloy via in-situ TiC particles

Enhanced tensile properties of CrMnFeCoNi0.8 high entropy alloy with in-situ TiC particles

Effect of TiC addition on the microstructure and mechanical properties of FeCoCrNiMn high entropy alloy fabricated by selective laser melting

The microstructural evolution and enhanced mechanical properties of in-situ Ti(C, N)-reinforced CoCrFeNiTi high-entropy alloy composites fabricated via mechanical alloying and spark plasma sintering

Mechanical and thermal expansion behaviour of TiC-reinforced CoCrFeMnNi high entropy alloy prepared by mechanical alloying and spark plasma sintering

Strengthening FeCrNiCu high entropy alloys via combining V additions with in-situ TiC particles

Microstructure and mechanical properties of CrFeNi high-entropy alloy reinforced by Al and Ti elements

Synergistic strengthening of FeCrNiCo high entropy alloys via micro-TiC and nano-SiC particles

In-situ TiC/Fe0.6MnNi1.4 medium entropy alloy matrix composites with excellent strength-ductility synergy

Improving Mechanical Properties of Co-Cr-Fe-Ni High Entropy Alloy via C and Mo Microalloying

Significant enhancement in comprehensive mechanical properties of Cr-Fe-Ni-Al-Si-Ti-Cu high-entropy alloy in as-cast state via C microalloying

Microstructures and Tribological Properties of TiC Reinforced FeCoNiCuAl High-Entropy Alloy at Normal and Elevated Temperature

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

Enhancing the strength-ductility trade-off in C 0.1 CrMnFeCoNi 0.8 high-entropy alloy: A combined experimental and DFT study

Mechanical properties and wear behaviors of FeCoNiCrMnTix high-entropy alloys manufactured by vacuum arc melting

Effects of Ti addition and annealing on microstructure and mechanical properties of CoCrFeMnNi high-entropy alloy

Tensile mechanical properties of CoCrFeNiTiAl high entropy alloy via molecular dynamics simulations

In Situ TiC/FeCrNiCu High-Entropy Alloy Matrix Composites: Reaction Mechanism, Microstructure and Mechanical Properties

Excellent strength-ductility in Ti-alloyed Fe35Ni35Cr20Mn10 high-entropy alloy

Effect of TiC Addition on the High-Temperature Hardness and the Carbide Stability in Al0.2CoCrFeNi1.5Ti High-Entropy Alloy

Effects of Ti Content on the Microstructure and Mechanical Properties of Al0.2CoCrFeNi2Tix High-Entropy Alloys