Abstract:The design guided by entropy enables the attainment of superior mechanical properties and further extends the concept of high-entropy alloys to intermetallic systems, thus forming high-entropy intermetallic compounds and even high-entropy intermetallic matrix composites. In this study, a novel high-entropy intermetallic matrix composites incorporating in-situ hierarchical TiB 2 particles was successfully synthesized through the spark plasma sintering. This method enables precise control over the microstructure, ensuring uniform distribution of the in-situ formed TiB 2 particles within the high-entropy intermetallic matrix. The in-situ formation of TiB 2 particles is achieved through a reactive sintering mechanism, which not only contributes to the composite's enhanced mechanical properties but also ensures excellent bonding between the precipitates and intermetallic matrix. The composites were composed of the ordered L1 2 intermetallic matrix and the hierarchical hexagonal-close-packed TiB 2 particles. Due to the L1 2 intermetallic matrix and the heterogeneous distribution of TiB 2 reinforcement, the intermetallic matrix composites demonstrate a high ultimate tensile strength of ∼1400 MPa. The TiB 2 play a pivotal role in impeding the propagation of cracks and the collaborate with distinctive disordered interfaces at grain boundaries, ensuring enough ductility. The disordered interfaces, exhibiting an average width in the range of 5 nm to 10 nm, possess the capability to delay fracture and promote the strain-hardening rate during plastic deformation. The intermetallic matrix composites overcome the limitations typically associated with conventional intermetallics and offer an excellent strength and ductility balance. These findings are expected to formulate additional strategies for designing in-situ reinforcement-strengthened high-entropy intermetallic matrix composites with exceptional mechanical properties.

In-situ TiC/Fe0.6MnNi1.4 medium entropy alloy matrix composites with excellent strength-ductility synergy

In Situ TiC/FeCrNiCu High-Entropy Alloy Matrix Composites: Reaction Mechanism, Microstructure and Mechanical Properties

Synergistic strengthening of FeCrNiCo high entropy alloys via micro-TiC and nano-SiC particles

Enhanced tensile properties of CrMnFeCoNi0.8 high entropy alloy with in-situ TiC particles

A novel as-cast NbTiC2/FeCrNiCu high entropy alloy matrix composite with remarkable tensile properties

Simultaneous Improvement in Strength and Ductility of TC4 Matrix Composites Reinforced with Ti1400 Alloy and In Situ-Synthesized TiC

Strengthening FeCrNiCu high entropy alloys via combining V additions with in-situ TiC particles

Tuning composition and microstructure by doping Ti and C for enhancing mechanical property and wear resistance of Al0.2Co1.5CrFeNi1.5Ti0.5 high entropy alloy matrix composites

Boosted mechanical properties of CoCr3Fe5Ni high entropy alloy via in-situ TiC particles

Preparation, Microstructure and Mechanical Properties of In-Situ TiC/Al–Si–Fe Aluminum Matrix Composites

A TiC reinforced Co-free Fe50Mn25Ni10Cr15 medium-entropy alloy with multiple strengthening mechanisms

M23C6 precipitation strengthened Fe0.6MnNi1.4 medium entropy alloy matrix composites

Microstructure, mechanical and soft magnetic properties of in-situ TiC reinforced Fe27.5Ni27.5Co45-based medium entropy composites

Effect of TiC addition on the microstructure and mechanical properties of FeCoCrNiMn high entropy alloy fabricated by selective laser melting

The microstructural evolution and enhanced mechanical properties of in-situ Ti(C, N)-reinforced CoCrFeNiTi high-entropy alloy composites fabricated via mechanical alloying and spark plasma sintering

Microstructures and mechanical properties of in-situ FeCrNiCu high entropy alloy matrix composites reinforced with NbC particles

High strength and ductility high-entropy intermetallic matrix composites reinforced with in-situ hierarchical TiB 2 particles

Microstructural characterization and mechanical properties of (TiC+TiB)/TA15 composites prepared by an in-situ synthesis method

Effect of TiC content on the microstructure and mechanical properties of Ti-30Mo-xTiC composites

Superior strength-ductility combination in TiC/TC4 composites via In situ construction Ti 2 Cu nanoparticles

Preparation and mechanical properties of titanium alloy matrix composites reinforced by Ti3AlC and TiC ceramic particulates