Synergistic strengthening of FeCrNiCo high entropy alloys via micro-TiC and nano-SiC particles

Lin Shen,Yue Zhao,Yulu Li,Hao Wu,Heguo Zhu,Zonghan Xie

DOI: https://doi.org/10.1016/j.mtcomm.2020.101729

IF: 3.8

2021-03-01

Materials Today Communications

Abstract:Adding reinforcing phases is an effective method to improve the mechanical performance of high entropy alloys. The strengthening effect of single reinforcement type has thus been studied to a great extend. Here FeCrCoNi high entropy alloy matrix composites embedded with micro-scale TiC and nano-scale SiC particles were fabricated via vacuum inductive melting method. The combined volume fraction of TiC and SiC particles was 10%, while the volume fraction of each particle was varied namely, 10 : 0, 7: 3, 5 : 5, 3 :7, and 0 : 10. The results show that the composite matrix has FCC structure, and the micro- TiC and nano- SiC particles were developed in the matrix through in-situ reactions. When the volume ratio of TiC and SiC particles is 7: 3, the mechanical properties reach the optimal combination. The yield tensile strength of the composite is 498.0 MPa, which is 207.2% higher than that of the matrix. The percent elongation is 41.2%. The strength increase stems from a synergy of grain refinement, thermal mismatch, solid solution, load bearing effect, and Orowan effect.

materials science, multidisciplinary