Near-seamless joining of Cf/SiC composites using Y3Si2C2 via electric field-assisted sintering technique

Teng Yu,Jie Xu,Xiaobing Zhou,Peter Tatarko,Yang Li,Zhengren Huang,Qing Huang

DOI: https://doi.org/10.1007/s40145-022-0593-3

IF: 11.534

2022-07-20

Journal of Advanced Ceramics

Abstract:A novel Y 3 Si 2 C 2 material was synthesized at a relatively low temperature (900 °C) using a molten salt method for the first time, and subsequently used as the joining material for carbon fiber reinforced SiC (C f /SiC) composites. The sound near-seamless joints with no obvious remaining interlayer were obtained at 1600 °C using an electric field-assisted sintering technique (FAST). During joining, a liquid phase was formed by the eutectic reaction among Y 3 Si 2 C 2 , γ (Y—C) phase, and SiC, followed by the precipitation of SiC particles. The presence of the liquid promoted the sintering of newly formed SiC particles, leading to their complete consolidation with the C f /SiC matrix. On the other hand, the excess of the liquid was pushed away from the joining area under the effect of a uniaxial pressure of 30 MPa, leading to the formation of the near-seamless joints. The highest shear strength ( τ ) of 17.2±2.9 MPa was obtained after being joined at 1600 °C for 10 min. The failure of the joints occurred in the C f /SiC matrix, indicating that the interface was stronger than that of the C f /SiC matrix. The formation of a near-seamless joint minimizes the mismatch of thermal expansion coefficients and also irradiation-induced swelling, suggesting that the proposed joining strategy can be potentially applied to SiC-based ceramic matrix composites (CMCs) for extreme environmental applications.

materials science, ceramics