Ultrafast low-temperature near-seamless joining of Cf/SiC using a sacrificial Pr3Si2C2 filler via electric current field-assisted sintering technique

Xiaobing Zhou,Teng Yu,Jie Xu,Yang Li,Zhengren Huang,Qing Huang

DOI: https://doi.org/10.1016/j.jeurceramsoc.2022.08.026

IF: 5.7

2022-12-01

Journal of the European Ceramic Society

Abstract:A novel layered structure material, Pr3Si2C2, was synthesized at a low temperature of 850 °C using a molten salt approach for the first time, and subsequently used as the joining filler for carbon fibers reinforced SiC composites (Cf/SiC). A robust near-seamless Cf/SiC joint was successfully obtained at 1509 °C (Ti) for 30 s, while an ultrafast heating rate of 6000 °C/min was applied via electric field-assisted sintering technology. The near-seamless joining process was attributed to the newly precipitated SiC grains, which were densified well with the Cf/SiC matrix by liquid-assisted sintering. The liquid phase was in-situ formed by the eutectic reaction between Pr3Si2C2 and SiC. The shear strength of the near-seamless joint obtained at 1509 °C for 30 s was 17.6 ± 3.0 MPa. The failure occurred in the Cf/SiC matrix. The formation of near-seamless Cf/SiC joints dismisses the issues related to thermal mismatch between Cf/SiC matrices and traditional joining fillers.

materials science, ceramics