Abstract:To expand the application of SiC/SiC joints under extreme conditions, Nano-Infiltration and Transient Eutectic (NITE) joining technology with AlN-Y 2 O 3 as a sintering additive was successfully developed. The rheological properties of the slurry and the microstructure evolution of the joints were systematically characterized by rheometer, SEM, EDS, EBSD, and TEM, respectively. Both room-temperature and high-temperature flexural strength was measured to evaluate the mechanical properties of the joints. An immersion test with concentrated nitric acids was performed to evaluate the corrosion resistance of the joints. The defect-free joining layer was composed of a dense α-SiC phase, a small amount of YAG(Y 3 Al 5 O 12 ) distributed in the triangular grain boundary, and a Y-Al-O glass phase from AlN-Y 2 O 3 . The mechanism of NITE joining could be attributed to the incoherent growth of the newly generated α-SiC in the joining layer along the α-SiC substrate. The maximum room-temperature strength of the joints was 320.5 ± 37.6 MPa. When the test temperatures were 1000 °C, 1200 °C, and 1400 °C, the flexural strength reached 238.7 ± 33.1 MPa, 215.5 ± 52.5 MPa, and 166.9 ± 52.0 MPa, respectively. After immersing the joints in a concentrated HNO 3 for 168 h, the flexural strength was 173.3 ± 12.6 MPa. The joints' excellent mechanical properties and corrosion resistance reveal great application potential under extreme conditions.

Joining of SiC ceramics by combining NITE-SiC interlayer and its thickness control

Low-temperature joining of SiC ceramics by NITE phase using CaO-Al2O3-MgO-SiO2 glass as an additive combined with surface oxidation

Joining SiC ceramics with ZrSi2–SiC filler at low temperatures

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Nano-infiltration and transient eutectic (NITE) joining of SiC ceramics applied for the harsh environments

SiC Ceramics Joined with an In-Situ Reaction Gradient Layer of TiC/Ti3SiC2 and Interface Stress Distribution Simulations

Low temperature seamless joining of SiC using a Ytterbium film

Joining of SiC Ceramic by Using the Liquid Polyvinylphenylsiloxane

Near-seamless joining of Cf/SiC composites using Y3Si2C2 via electric field-assisted sintering technique

Interfacial reaction mechanism of SiC joints joined by pure nickel foil

Joining silicon nitride ceramics with ZrSi2-SiC composite filler by spark plasma sintering

Effects of the joining process on the microstructure and properties of liquid-phase-sintered SiC-SiC joints formed with Ti foil

Joining of SiC using CoFeCrNiCuTi high entropy alloy filler by electric current field assisted sintering

Microstructure and shear strength of SiC/Zr joint brazed with LiAlSiO4/graphene-coated Cu-foam composite interlayer

An ultra-strength SiC ceramic joint with an in-situ formed high-entropy carbide interlayer via diffusion bonding by spark plasma sintering

Joining of pressureless sintered SiC using polysiloxane SR355 with active additive Ni nanopowder

Microstructure and mechanical properties of SiC/SiC joints reinforced by in-situ growth SiC nanowires

Heat-resistant Joints of Si3N4 Ceramics with Intermetallic Compounds Formed in Situ

Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): Joining processes, joint strength, and interfacial behavior

Microstructure and Properties of Porous Si3N4/Dense Si3N4 Joints Bonded Using RE–Si–Al–O–N (RE = Y or Yb) Glasses

Joining of SiC ceramics using CaO-Al2O3-SiO2 (CAS) glass ceramics