Abstract:Prepared with pure Ti and Si powders as raw materials, the Ti16Si84 alloy (at. %) was obtained through refining in an intermediate frequency magnetic induction furnace. In this study, a novel method to join SiC fiber-reinforced SiC matrix composites (SiCf/SiC composites) under non-pressurized conditions is proposed using Ti16Si84 alloy foil as the joining material. The joining process was optimized, and the wettability, microscopic morphology, and bonding reaction of the joint were studied, along with the fracture characteristics and the bonding mechanism. Additionally, the corrosion resistance of the joints was examined in pure static water with high-dissolved oxygen (246 ppm) at 360 °C and 18.6 MPa. The results showed that Ti16Si84 alloy has good wettability with SiCf/SiC, enabling it to join SiCf/SiC successfully. The joint was composed of SiC, TiSi2, and Si, and there was no intermediate between them. When the brazing temperature was 1410 °C, the shear strength of the joint reached 42.5 MPa, and the joint integrity was favorable. After the shear test, numerous SiCf/SiC composites were torn by the solder, indicating their advantageous shear properties and high joint strength. After three days of corrosion, the joint samples' weight showed almost no changes. The corrosion depth was less than 20 μm and the residual shear strength of the corroded joined samples was 38.37 MPa, indicating excellent hydrothermal corrosion resistance of the joint material.

Low-temperature joining of SiC ceramics by NITE phase using CaO-Al2O3-MgO-SiO2 glass as an additive combined with surface oxidation

Joining of SiC ceramics by combining NITE-SiC interlayer and its thickness control

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Nano-infiltration and transient eutectic (NITE) joining of SiC ceramics applied for the harsh environments

Joining of SiC ceramics using CaO-Al2O3-SiO2 (CAS) glass ceramics

Joining SiC ceramics with ZrSi2–SiC filler at low temperatures

Joining of pressureless sintered SiC using polysiloxane SR355 with active additive Ni nanopowder

Near-seamless joining of Cf/SiC composites using Y3Si2C2 via electric field-assisted sintering technique

Joining of SiC Ceramic by Using the Liquid Polyvinylphenylsiloxane

Effects of the joining process on the microstructure and properties of liquid-phase-sintered SiC-SiC joints formed with Ti foil

Joining of sintered SiC ceramics at a lower temperature using borosilicate glass with laser cladding Si modification layer

Microstructure and mechanical properties of SiC joint using anorthite based glass-ceramic and first principles calculation of joint interface

Heat-resistant Joints of Si3N4 Ceramics with Intermetallic Compounds Formed in Situ

Joining silicon nitride ceramics with ZrSi2-SiC composite filler by spark plasma sintering

Microstructure and properties of pressure-less joining of SiCf/SiC composites by Ti–Si alloys

Microstructure and mechanical properties of SiC/SiC joints reinforced by in-situ growth SiC nanowires

Effect of nickel nanopowders addition on joining property of silicon carbide to itself by polysilazane

Low temperature seamless joining of SiC using a Ytterbium film

Interfacial reaction mechanism of SiC joints joined by pure nickel foil

Microstructure and Shear Strength of SiC Joint Brazed with LiAlSiO4 Reinforced AgCuTi Composite Filler

SiC Ceramics Joined with an In-Situ Reaction Gradient Layer of TiC/Ti3SiC2 and Interface Stress Distribution Simulations