Abstract:The effects of an α-Al2O3 nanoparticle filler in the SiC matrix on the mechanical properties and failure mechanism of the unidirectional, laminated carbon fiber-reinforced SiC composites were investigated in this work. First, α-Al2O3 nanoparticles were added to the carbon fiber bundles using a slurry impregnation method, and then the Cf/SiC composite with an α-Al2O3 nanoparticle filler (Cf/SiC-Al2O3) was fabricated using a precursor infiltration and pyrolysis method. The microstructure of the Cf/SiC-Al2O3 composite showed chemical compatibility between the α-Al2O3 and the pyrolysis SiC. The Cf/SiC-Al2O3 composite with a low porosity of ~6.67% achieved a good flexural strength of 629.3 MPa and a good fracture toughness of 25.2 MPa·m1/2. The interlaminar shear strength of the Cf/SiC-Al2O3 composite was 11.7 MPa. The SiC-Al2O3 matrix also presented a considerable Young’s modulus of 138.2 ± 8.66 GPa and hardness of 10.3 ± 1.03 GPa. Further analysis indicated that the good mechanical properties with the addition of an α-Al2O3 filler were not only related to the dense matrix and the improvement of the mechanical properties of the matrix. They also originated from the thermal residual compressive stress in the SiC matrix close to the α-Al2O3 nanoparticles caused by the thermal expansion mismatch, which could reflect and close the cracks in the matrix. The findings of this study provide more methods for designing new composites exhibiting a good performance.

Interfacial Regulation and Fracture Mechanism of Al–Si/SiC Composites Infiltrated under Super-Gravity Field

Influence of Reinforcement with Multimodal Distribution on Thermophysical Properties and Fracture Behavior in Al-Si/SiC Composites Infiltrated under Super-Gravity Field

Super-gravity field assisted homogeneous distribution of sub-micron eutectic Si in Al-Si alloy

Influence of Super-Gravity Coefficient on Spatial Distribution of Solidification Structure in Al-14.5Si Alloys

Experiment and FEM Study on Uniaxial Tensile of SiCp/Al

Fracture Mechanical and Ablation Behaviors of C/SiC-Cu3Si-Cu Interpenetrating Composites and Their Dependence on Metal Addition and Interface Thickness

Towards enhanced elevated-temperature mechanical properties by regulation of eutectic structure in Al-Cu-Si alloys solidified under super-gravity field

Microstructure and Mechanical Properties of Unidirectional, Laminated Cf/SiC Composites with α-Al2O3 Nanoparticles as Filler

Toward Enhanced Strength and Ductility of Al–14.5Si Alloy via Solidification Under Super‐Gravity Field

Fabrication and characterization of SiC/Al composites prepared by laser powder bed fusion (LPBF) combined with vacuum pressure infiltration

Interfacial Bonding of Al-Si/C Composites and Improvement of the Thermal Shock Resistance

Effect of Alloying Elements on Mechanical Properties of the SiC/Al Biconnected Composites

Microstructural Evolution and Mechanical Properties of SiC/Al-40Si Composites Fabricated by High Pressure Solidification.

Effect of SiC Nanowires Addition on the Interfacial Microstructure and Mechanical Properties of the Cf-SiCNWs/AZ91D Composite

Microstructure and properties of C/C–SiC composites prepared by reactive melt infiltration at low temperature in vacuum

Nano-Phase and SiC–Si Spherical Microstructure in SiC/Al-50Si Composites Solidified under High Pressure

Effect of Infiltrated Eutectic AlSi on the Microstructure and Properties of C/C Composites

Mechanism of Formation of Fibrous Eutectic Si and Thermal Conductivity of SiCp/Al-20Si Composites Solidified under High Pressure

Microstructure, mechanical and friction-wear properties of SiC-WC composite with Al and C as sintering aids

STUDY OF FABRICATION AND COMPRESSIVE PERFORMANCE OF ALUMINIUM ALLOY MATRIX GRADIENT COMPOSITES REINFORCED WITH SiC PARTICLES

Microstructure and Mechanical Properties of 45 vol.% SiC p /7075Al Composite