Abstract:Ti-Al intermetallics/TiB2 composites were prepared from elemental powder mixtures by the method of self-propagating high-temperature synthesis (SHS). Reactant mixtures were formulated to contain two parts; one group was (2Ti + 4B) to form 2TiB2 and the other group was (Ti + xAl) to produce Ti-Al intermetallic compounds. The content of Al ranged between x = 0.33 and 3.0, which was equivalent to the Ti/Al atomic ratio from Ti-25% Al to Ti-75% Al in the (Ti + xAl) group. The results showed that the increase of Al percentage reduced the overall combustion exothermicity and led to a slower self-sustaining combustion wave speed and a lower combustion temperature. Apparent activation energy of the Ti-Al-B solid-state combustion reaction was determined to be 114.7 kJ/mol by this study. Based on the XRD analysis, Ti-Al intermetallics/TiB2 composites featuring Ti3Al, TiAl, TiAl2, and TiAl3 as the dominant aluminide phase were respectively synthesized from the samples of Ti-25%~40% Al, Ti-50%~60% Al, Ti-71.4% Al, and Ti-75% Al. For the samples of Ti-25% Al and Ti-30% Al, Ti3Al was the only aluminide formed. The microstructure of the composites exhibited that TiB2 grains with a columnar shape of 2‒3 μm in length were well distributed and embedded in the aluminide matrix. This study demonstrated an effective and energy-saving fabrication route for producing Ti-Al intermetallics/TiB2 composites with different dominant aluminide phases.

Effect of Composition of Interlayer on TiAl/TiB2 Cermet Self-Propagating High-Temperature Synthesis Joint

Effect of Reaction Heat on Reactive Joining of TiAl Intermetallics Using Ti–Al–C Interlayers

SHS joining of TiAl intermetallics to TiB2 cermet

Effect of Ti–Al Content on Microstructure and Mechanical Properties of Cf/Al and TiAl Joint by Laser Ignited Self-Propagating High-Temperature Synthesis

Microstructure of TiAl/TiC cermet joint bonded by combustion synthesis

Mlicrostructure of TiAl/TiC cermet joint bonded by combustion synthesis

Effect of Ti on the microstructures and properties of ceramic bonded joints with Intel-metallic compounds

Formation Mechanism and Microstructure of C_f/Al and TiAl Joint by SHS Joining with Al-Ni-CuO Interlayer

Effects of Joining Conditions on Microstructure and Mechanical Properties of C F /al Composites and TiAl Alloy Combustion Synthesis Joints

Effect of Ti on the Microstructures and Properties of Ceramic Bonded Joints with Intermetallic Compounds

Microstructure and Formation Mechanism of SHS Joining Between C F /al Composites and TiAl Intermetallic with Al–Ni–CuO Interlayer

Joining of TiAl Intermetallic by Self-Propagating High-Temperature Synthesis

Ni Interlayer Induced Strengthening Effect in Alumina/alumina Joint Bonded with Ti/Cu/Ni/Cu/Ti Composite Foils

Microstructure and Strength of the Tib2 Cermet/Tial Joint Diffusion Bonded with Ni Interlayer

Bonding Ceramics with Al/Ti/Al Multilayers by in Situ Formation of Intermetallic Compound

Diffusion bonding of TiB3 cermet to TiAl intermetallic

Microstructure and mechanical properties of Al/Ti brazed joints by using pure Al interlayer

Effect of Cu interlayer with different thickness on microstructure and properties of Al2O3/Kovar joints brazed with Cu–Ti/Cu/BNi-2 composite filler

Understanding the Microstructure Evolution Mechanism and the Microstructure-Strength Correlations of Ti3SiC2/Ti2AlNb Joint Brazed with AgCu Interlayer

Effects of Ti/Al Ratio on Formation of Ti-Al Intermetallics/TiB2 Composites by SHS from Ti-Al-B Powder Mixtures

Interfacial Microstructure and Mechanical Property of ZrC-SiC Ceramic and Ti6Al4V Joint Brazed with AgCuTi Alloy