Abstract:It is necessary to carry out comprehensive pre-researches on external insulation uo ensure these projects to be operated safely.In order to provide a scientific reference for the constructions of DC transmission lines in high altitude areas,the flashover characteristics of two kinds of large tonnage insulators(porcelain and glass insulator) were investigated systematically in natural high altitude areas(1970 m).In the experiments,solid layer method was used and 50% flashover voltages(U50%) were determined by the up-and-down method with negative voltage.The arcing behavior on natural polluted insulator surfaces was observed using a PCI-2000S high speed camera.Experimental results indicate that suspension patterns(I,V and Y-strings),different kinds of soluble salt,NSDD(non-soluble deposit density) and un-uniform contamination have a significant effect on the flashover characteristics of porcelain insulator.These factors are important for outdoor insulation design for DC transmission lines,which are neglected in most laboratory experiments.Flashover performances of two types of glass insulators(300 kN and 550 kN) with different leakage distances and unit spacing were studied,too.It is shown that the development path of arcs on insulator surface is greatly influenced by the profiles,resulting in different flashover performances for the two types of glass insulators with different profiles.Meanwhile,comparison of the flashover performances between porcelain and glass insulators was carried out in the same experimental conditions.Experimental results indicate that the flashover characteristics for glass insulators are similar to those for porcelain insulators.

Study on Poliution Performance of Line Insulators Under High Altitude Area

STUDY OF THE POLLUTION PERFORMANCE OF COMPOSITE INSULATOR IN HIGH ALTITUDE AREA

Study on Selection of 750 Kv Transmission Line Insulators in High Altitude Area

Leakage Current Characteristics of Polluted Insulators at High Altitudes

Experimental Study on Streamer Discharge Characteristics Along Contamination Insulator Surface

Effect of Uneven Hydrophobicity on Anti-pollution Flashover Performance of Line Insulators

Study on the Contamination Character of Suspending Insulator with RTV Coating

Analysis on Wetting and Conductive Properties of Natural Polluted Insulators

Study on Selection Method of External Insulation and Insulator Type Selection for 750 Kv Transmission and Transformation Equipment in High Altitude Area

Research on Leakage Current and Discharge Phenomena of Insulators

Experimental Investigation on Outdoor Insulation for Dc Transmission Line at High Altitudes

Study on the various pollution performance of the post insulators in exceeding high voltage in high altitude area

Study on Flashover Performance of Post Insulator for 750 Kv Transformer Substation in High Altitude Area

Flashover Performance of Long-String Insulators of DC Power Transmission Line at High Altitude

Effect of Soluble Salt Composition on Contamination Degree of Insulator Surface

Pollution Flashover Performance of Converter Station Post Insulators at High Altitude Area

External Insulation Characteristics of Ultra High Voltage Transmission Line in High Altitude Area

Study on DC Leakage Current of Glass Insulator in High Altitude Area

AC Pollution Flashover Performance of Insulator Strings Partially Treated With Semiconductive RTV Coating

Measurement of Contamination Distribution on the Hydrophobic Surface of Insulators by a Partial Surface Conductivity Method

DC Pollution Resistance Performance of Composite Insulators in High Altitude