Abstract:Active electronics implemented on cheap flexible polymer substrates offer the promise of novel display technologies, wearable electronics, large area memory, and a multitude of other, as-yet-unthought-of applications that require low cost and high volume manufacturing. Thin film transistors (TFT's) fabricated on temperature-sensitive plastic substrates at low temperatures are the key to this technology. TFT's that use metal (In, Zn, Sn, Ga) oxide channels offer both high mobility (relative to amorphous Si) and the advantage of optical transparency in the visible regime. We report on the fabrication and performance of amorphous oxide transparent thin film transistors that use dc-magnetron sputter techniques to deposit IZO (In2O3 — 10 wt.% ZnO) at low oxygen potential (0 vol.% O2) for the source, drain, and gate-contact metallization and, at higher oxygen partial pressures (10 vol.% O2), for the semi-conducting channel. The devices in this study were processed at room temperature except for a single 280 °C PECVD deposition step to deposit a 230 nm-thick SiOx gate dielectric. The devices are optically transparent and operate in depletion mode with a threshold voltage of −5 V, mobility of 15 cm2/V s, an on-off ratio of >106 and, a sub-threshold slope of 1.2 V/decade. In addition, we report persistent photo-conductivity in the channel region of these devices when exposed to UV illumination.

Fully transparent flexible tin-doped zinc oxide thin film transistors fabricated on plastic substrate

Performance Enhancement of Fully Transparent Tin-Doped Zinc Oxide Thin-Film Transistors Fabricated by Sputtering at Low Temperature

High-Performance Flexible Tin-Zinc-Oxide Thin-Film Transistors Fabricated on Plastic Substrates

High-performance Si-doped ZnO Thin-film Transistors Fabricated on Flexible Plastic Substrate at Low Temperature

Effects of various oxygen partial pressures on Ti-doped ZnO thin film transistors fabricated on flexible plastic substrate

Flexible Nickel-Doped Zinc Oxide Thin-Film Transistors Fabricated On Plastic Substrates At Low Temperature

Room-temperature fabrication of flexible gallium-doped zinc oxide thin-film transistors on plastic substrates

Fully transparent al-doped ZnO thin-film transistors on flexible plastic substrates

Flexible Thin-Film Transistors on Plastic Substrate at Room Temperature.

Al-Doped Zno Thin-Film Transistors on Flexible Plastic Substrate

Fully transparent flexible dual-layer channel Ga-doped ZnO thin-film transistors on plastic substrates

Fully-transparent Mo-doped ZnO TFTs fabricated in different oxygen partial pressure at low temperature

Transparent gallium doped zinc oxide thin-film transistors fabricated on glass substrate

High Performance Aluminum-Doped Zno Thin Film Transistors with High-K Gate Dielectrics Fabricated at Low Temperature

Low-Temperature Fabrication of Fully Transparent Igzo Thin Film Transistors on Glass Substrate

Fabrication And Characteristics Of Zno-Based Thin Film Transistors

High-performance dual-layer channel ITO/TZO TFTs fabricated on glass substrate

Study of zinc tin oxide thin-film transistor

Flexible Dual-layer Channel Gallium-doped ZnO Thin-film Transistors Fabricated on Plastic Substrates at Room Temperature

Amorphous IZO-based transparent thin film transistors

Flexible Transparent Junctionless TFTs with Oxygen-Tuned Indium-Zinc-Oxide Channels