Abstract:Highlights • A dual phase β+α Mg-Li alloy was fabricated as reducing the Li content. • The dispersed α-Mg phases mitigate the dimension and distribution of eutectic I-Phase along grain boundaries. • The dual phase Mg-Li alloy exhibits enhanced ductility (elongation (EL) = 17.8 %) due to the improved deformation compatibility. • The continuity of slip between α-Mg and β-Li on plane pairs of {123}Li-{ 112 ̄2 }Mg and {112}Li-{ 112 ̄2 }Mg assures the deformation compatibility across interfaces. • Two strengthening mechanisms, nanoscale B2 (Li, Mg) 3 Zn-type precipitates and the microscale I-phase, are characterized. Mg-Li alloys with high lithium concentrations possess a lightweight body-centered cubic (BCC) matrix structure (β-Li). Interspersed eutectics (primarily the reticulated I-phase) often form along phase boundaries (PBs) and grain boundaries (GBs) which strengthen the alloy but cause the loss of ductility due to the brittle behavior of I-phase. By modifying the Li content, we fabricated the (β+α) biphase Mg-Li alloy in which the α-Mg phase with a hexagonal close-packed structure (HCP) is embedded in β-Li matrix, significantly increasing interface density. The high-density interfaces mitigate the distribution and dimension of the I-phase along GBs and PBs. The alloy exhibits enhanced ductility (elongation (EL) = 17.8 %) compared with the alloy without the α-Mg phase (EL = 5.1 %). Structural characterizations unveil the strengthening mechanism of the nanoscale B2 (Li, Mg) 3 Zn-type precipitates in conjunction with the microscale I-phase. The (Li, Mg) 3 Zn nanophases augment the yield and ultimate tensile strength of the alloy without a discernible compromise in ductility, predominantly due to gliding dislocations cutting through the precipitates. In contrast, the microscale I-phase presents a formidable barrier to dislocation motion, facilitating dislocation pileups at interfaces and culminating in diminished ductility across the interface. In-situ stretching techniques were employed to scrutinize the microstructural evolution of alloys during tensile deformation, elucidating that the deformation compatibility of alloys correlates with the average size of the I-phase and their distribution along GBs and PBs. Corresponding to the orientation relationship (OR) between the α-Mg and β-Li phases {110}Li//{0001}Mg and < 1 ̄11 >Li //< 112 ̄0 >Mg, the slip continuity between α-Mg and β-Li on plane pairs of {123}Li-{ 112 ̄2 }Mg and {112}Li-{ 112 ̄2 }Mg assures the deformation compatibility through facilitating the deformation across interfaces. Simultaneously, during the stretching process, the dispersed I-phase instigates the emergence of sporadic microcracks, indicating gradual damage evolution. These discoveries offer novel insights into achieving exceptional strength-ductility amalgamations in Mg-Li alloys through microstructural adjustments.

Effect of Icosahedral Phase on the Thermal Stability and Ageing Response of a Duplex Structured Mg–Li Alloy

Natural Ageing Responses of Duplex Structured Mg-Li Based Alloys

Effects of solid solution and aging process on microstructure and mechanical properties of Mg-Gd-Y alloy

Effect of Icosahedral Phase on the Crystallographic Texture and Mechanical Anisotropy of Duplex Structured Mg–Li Alloys

Effect of Icosahedral Phase on Crystallographic Texture and Mechanical Anisotropy of Mg–4%Li Based Alloys

Inhibiting Effect of I-phase Formation on the Plastic Instability of the Duplex Structured Mg-8Li-6Zn-1.2Y (in Wt.%) Alloy

The Strengthening Effect of Icosahedral Phase on As-Extruded Mg–Li Alloys

Effect of Y on Age Hardening Response and Mechanical Properties of Mg-xY–1.5LPC −0.4zr Alloys

Aging Response and Mechanism of Dual-Phase Mg-Li-Al-Zn Alloy

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Effect of Quasicrystalline Phase on Improving the Corrosion Resistance of a Duplex Structured Mg–Li Alloy

Enhancing the ductility of cast Mg-Li alloys via dispersed α-Mg phase mitigating the dimension and distribution of interspersed eutectics along grain boundaries

Influence of Heat Treatment on Microstructure and Mechanical Properties of As-Cast Mg–8Li–3Al–2Zn–xY Alloy with Duplex Structure

Mechanical Properties of the Icosahedral Phase Reinforced Duplex Mg–Li Alloy Both at Room and Elevated Temperatures

Phase transformations in an ultralight BCC Mg alloy during anisothermal ageing

Effects of Icosahedral Phase on Mechanical Anisotropy of As-Extruded Mg-14Li (in Wt%) Based Alloys

Effects of Icosahedral Phase Formation on the Microstructure and Mechanical Improvement of Mg Alloys: A Review

Influence of Mg content on ageing precipitation behavior of Al-Cu-Li-x alloys

Microstructure Evolution and In Situ Resistivity Response of 2196 Al−Li Alloy during Aging Process

Determining the Effect of Microstructure and Heat Treatment on the Mechanical Strengthening Behavior of an Aluminum Alloy Containing Lithium Precipitation Hardened with the δ′ Al3Li Intermetallic Phase

Effect of Ageing Treatment on the Precipitation Behaviour of Mg–Gd–Y–Zn–Zr Alloy