Abstract:The structure of vertically aligned carbon nanotubes (CNTs) severely depends on the properties of pre-prepared catalyst films. Aiming for the preparation of precisely controlled catalyst film, atomic layer deposition (ALD) was employed to deposit uniform Fe 2 O 3 film for the growth of CNT arrays on planar substrate surfaces as well as the curved ones. Iron acetylacetonate and ozone were introduced into the reactor alternately as precursors to realize the formation of catalyst films. By varying the deposition cycles, uniform and smooth Fe 2 O 3 catalyst films with different thicknesses were obtained on Si/SiO 2 substrate, which supported the growth of highly oriented few-walled CNT arrays. Utilizing the advantage of ALD process in coating non-planar surfaces, uniform catalyst films can also be successfully deposited onto quartz fibers. Aligned few-walled CNTs can be grafted on the quartz fibers, and they self-organized into a leaf-shaped structure due to the curved surface morphology. The growth of aligned CNTs on non-planar surfaces holds promise in constructing hierarchical CNT architectures in future.

THE GROWTH OF ALIGNED CARBON NANOTUBES ON FeNiCo CATALYST FILMS

Preferential Growth of Carbon Nanotubes/Nanofibers Using Lithographically Patterned Catalysts

Effect of Nickel, Iron and Cobalt on Growth of Aligned Carbon Nanotubes

Growth Process Conditions of Vertically Aligned Carbon Nanotubes Using Plasma Enhanced Chemical Vapor Deposition

Growth of Aligned Multiwall Carbon Nanotubes and the Effect of Adsorbates on the Field Emission Properties

Uniform Patterned Growth of Carbon Nanotubes Without Surface Carbon

Thin-Film Metal Catalyst For The Production Of Multi-Wall And Single-Wall Carbon Nanotubes

Synthesis of Well-Aligned Multiwalled Carbon Nanotubes on Ni Catalyst Using Radio Frequency Plasma-Enhanced Chemical Vapor Deposition

Controlled Growth of Fe Catalyst Film for Synthesis of Vertically Aligned Carbon Nanotubes by Glancing Angle Deposition

Microstructure Control of Fe Catalyst Films for the Growth of Multiwalled Carbon Nanotube Arrays

Growth and Characterization of Aligned Carbon Nanotubes from Patterned Nickel Nanodots and Uniform Thin Films

Effect of surface morphology of Ni thin film on the growth of aligned carbon nanotubes by microwave plasma-enhanced chemical vapor deposition

Study on the Definite Direction Growth of Carbon Nanotubes by the Microwave Plasma-Enhanced Chemical Vapro Phase Deposition

Growth and Field Emission of Carbon Nanofibers on Electroless Ni-P Alloy Catalyst

The Role of the Catalytic Particle in the Growth of Carbon Nanotubes by Plasma Enhanced Chemical Vapor Deposition

J2240204 Evaluation of the Properties and Alignment of Carbon Nanotube Sheet Grown by CVD Method

Growth of Aligned Carbon Nanotubes with Controlled Site Density

TEM Investigation on the Growth Mechanism of Carbon Nanotubes Synthesized by Hot-Filament Chemical Vapor Deposition.

Progress On Production Of Carbon Nanotubes

Multi-Directional Growth of Aligned Carbon Nanotubes Over Catalyst Film Prepared by Atomic Layer Deposition

Synthesis of Aligned Carbon Nanotubes by Thermal Chemical Vapor Deposition