Abstract:In this study, the synthesis of multi-walled carbon nanotubes (MWCNTs) was carried out by chemical vapor deposition (CVD) using propane as the carbon source and Si as the catalyst support. The effect of CVD process variables such as temperature, choice of catalyst, etc on the growth behavior of nanotubes has been examined to understand the catalytic growth of CNTs. The transition metal catalysts, Fe and Ni, were used in both elemental metal form and in a metal complex form. In the case of elemental metal catalysts, the respective metals were deposited over the Si substrate using thermal evaporation following which nanotubes were synthesized by means of CVD. Subsequent studies of the synthesized carbon nanostructures employing elemental metal catalysts revealed a significant influence of the temperature and the catalyst material on the structure of CNTs. The CNTs synthesized using Ni catalyst were bamboo-like whereas the CNTs developed employing Fe catalyst were straight tubes with partial metal filling. Consequently, growth models for the different growth mechanisms have been proposed. Certain limitations of the above process have been overcome by employing spin-coating of a metal complex catalyst material on the Si substrate. The CVD synthesis of nanotubes using metal complex catalysts always resulted in partially catalyst filled CNTs. More importantly, the metal complex catalyst could be easily patterned on the Si substrate using spin-coating and photolithography, which resulted in site selective growth of partially catalyst filled MWCNTs. Since the entire process of site selective growth is suitable for conventional device fabrication, this method is a promising and practical pathway for large-scale fabrication of several magnetic material filled CNT-based devices.

Synthesis of Well-Aligned Multiwalled Carbon Nanotubes on Ni Catalyst Using Radio Frequency Plasma-Enhanced Chemical Vapor Deposition

The Role of the Catalytic Particle in the Growth of Carbon Nanotubes by Plasma Enhanced Chemical Vapor Deposition

Growth Process Conditions of Vertically Aligned Carbon Nanotubes Using Plasma Enhanced Chemical Vapor Deposition

Confined Growth of Carbon Nanotubes in Nanocutting Channel on Highly Oriented Pyrolytic Graphite

Synthesis of Aligned Carbon Nanotubes by Thermal Chemical Vapor Deposition

Effect of surface morphology of Ni thin film on the growth of aligned carbon nanotubes by microwave plasma-enhanced chemical vapor deposition

Uniform Patterned Growth of Carbon Nanotubes Without Surface Carbon

Study on the Definite Direction Growth of Carbon Nanotubes by the Microwave Plasma-Enhanced Chemical Vapro Phase Deposition

Preferential Growth of Carbon Nanotubes/Nanofibers Using Lithographically Patterned Catalysts

Plasma Composition During Plasma-Enhanced Chemical Vapor Deposition of Carbon Nanotubes

Application of NiO deposited by atomic layer deposition for carbon nanotubes catalytic growth

THE GROWTH OF ALIGNED CARBON NANOTUBES ON FeNiCo CATALYST FILMS

In-situ filling of Fe/Ni oxide nanowire into carbon nanotubes doped with nitrogen in CH4/H2/air plasmas

Thin-Film Metal Catalyst For The Production Of Multi-Wall And Single-Wall Carbon Nanotubes

Growth Of High-Quality Single-Wall Carbon Nanotubes Without Amorphous Carbon Formation

Growth and Characterization of Multi-Walled Carbon Nanotubes using Chemical Vapor Deposition

SYNTHESIS OF ALIGNED CARBON NANOTUBES ARRAY BY RADIO FREQUENCY PLASMA-ENHANCED HOT FILAMENT CHEMICAL VAPOR DEPOSITION

Carbon nanotube synthesis from propane decomposition on a pre-treated Ni overlayer

The effect of Fe and Ni catalysts on the growth of multiwalled carbon nanotubes using chemical vapor deposition

Synthesis of multi-walled carbon nanotubes by microwave plasma-enhanced chemical vapor deposition

Synthesis and Characterization of Well-Aligned Carbon Nitrogen Nanotubes by Microwave Plasma Chemical Vapor Deposition