Abstract:As consumer electronics and industrial control systems continue to evolve, the operating temperature range of capacitors is gradually increasing. Barium titanate-based ceramic capacitors are widely used in the field of high dielectrics, so temperature-stable barium titanate-based dielectric materials have been a hot research topic in the field of dielectric ceramics. The construction of a core–shell structure by unequal doping is an effective way to obtain temperature-stable dielectric materials. At the same time, this structure retains part of the highly dielectric tetragonal phase, and materials with overall high dielectric constants can be obtained. In this work, we prepared BaTiO3-xNaNbO3-0.002Gd2O3 (x = 1.0–6.0 mol%) as well as BaTiO3-0.05NaNbO3-yGd2O3 (y = 0–0.30 mol%) dielectric ceramics. On the basis of high-electronic-bandgap NaNbO3-modified BaTiO3 dielectric ceramics, a core–shell structure with a larger proportion of core phase was obtained by further doping the amphiphilic rare-earth oxide Gd2O3. By designing this core–shell structure, the temperature stability range of capacitors can be expanded. At a doping level of 5.0 mol% NaNbO3 and 0.20 mol% Gd2O3, the room temperature dielectric constant εr = 4266 and dielectric loss tan δ = 0.95% conforms to the X8R standard (from −55 °C to 150 °C, TCC < ±15%); volume resistivity ρv = 10,200 GΩ·cm and breakdown strength Eb = 13.5 kV/mm is attained in BaTiO3-based ceramics. The system has excellent dielectric and insulating properties; it provides a new solution for temperature-stable dielectric ceramics.

Influence of Sintering Temperature on Core–shell Structure Evolution and Reliability in Dy Modified BaTiO3 Dielectric Ceramics

Core-shell structure in nanocrystalline modified BaTiO3 dielectric ceramics prepared by different sintering methods

Formation of Core‐Shell Structure in Ultrafine‐Grained BaTiO3‐Based Ceramics Through Nanodopant Method

Sintering Behavior and Reliability Characteristics of Batio3-Based Ceramics Prepared by Different Methods

Effects of Sintering Temperature and Bi2O3, Y2O3 and MgO Co-Doping on the Dielectric Properties of X8R BaTiO3-based Ceramics

Effects of Sintering Temperature on the Dielectric Properties of Batio3 Based X7r Ceramics

Improving Multifunctional Performance of Dy-doped (ba0.85ca0.15)(zr0.1ti0.9)o< Sub>3 Ceramics Via Tailoring Dy-doping Amount and Ceramic Processing

Synergistic Effect of Rare-Earth Elements on the Dielectric Properties and Reliability of BaTiO3-based Ceramics for Multilayer Ceramic Capacitors

Wide Temperature Stability of BaTiO3-NaNbO3-Gd2O3 Dielectric Ceramics with Grain Core–Shell Structure

Effect of sintering atmospheres on the microstructure and dielectric properties of Yb/Mg co-doped BaTiO3 ceramics

Effect of Ho‐Dy Co‐doping on the Electrical Properties and Reliability of BaTiO3‐based Nanoceramics for Base Metal Electrode Multilayer Ceramic Capacitor

Fabrication, Structure and Property of BaTiO3-based Dielectric Ceramics with a Multilayer Core–shell Structure

Influence of sintering temperature on giant dielectric property of CaCu3Ti4O12

Microstructure Effect on Dielectric Properties of MgO-doped BaTiO3–BiYO3 Ceramics

Effects Of Rare Earth Elements On The Dielectric Properties Of Batio3-Based X7r Materials

Preparation of Nano BaTiO3-Based Dielectric Ceramics by Different Sintering Methods

Superior Reliability Via Two‐Step Sintering: Barium Titanate Ceramics

Diffusion and Defect Chemistry of Temperature-Stable BaTiO3-based Ceramics: Experiment and Theoretical Calculations

Modeling of the Core-Shell Microstructure of Temperature-Stable Batio3 Based Dielectrics for Multilayer Ceramic Capacitors

Effects of Rare Earth Elements on the Dielectric Properties of BaTiO<sub>3</sub>-Based X7R Materials

Effect of Milling Process on the Core-Shell Structures and Dielectric Properties of Fine-Grained BaTiO3-based X7R Ceramic Materials