Abstract:BaTiO3‐based compounds are recognized as the most common dielectric material used in multilayer ceramic capacitors (MLCCs), among which, BaTiO3‐BiMeO3 is extensively investigated to improve the thermal stability and extend the service life of MLCCs, which are strongly dependent on the conductivity at high temperatures. Despite numerous efforts have been made, the mechanism of oxygen vacancy conduction, which makes the major contributions to the conduction mechanism of BaTiO3‐based compounds at high temperatures below 450°C, is still unclear. In this paper, BaTiO3, 0.88BaTiO3‐0.12Bi(Zn2/3Nb1/3)O3, 0.88BaTiO3‐0.12Bi(Mg2/3Nb1/3)O3, and 0.88BaTiO3‐0.12Bi(Mg2/3Ta1/3)O3 ceramics have been prepared by solid‐state reaction method, and their electrical and dielectric properties have been studied in detail. Meanwhile, first principles were applied to study the mechanisms of the increase of electrical resistivity and the decrease of dielectric loss. It is found that B‐site dopants (Zn, Mg, Nb and Ta) are effective in reducing the conductivity by inhibiting the migration of oxygen vacancies, which is a kinetics process with an increase of energy barrier. Notably, the greater ability of Zn to inhibit oxygen vacancies migration is a combination of thermodynamics (a strong ability to trap oxygen vacancies) and kinetics (an effect of block the migrating defects in the lattice). This work reveals a new insight into the mechanism of oxygen vacancies migration in BaTiO3‐based perovskite compounds, which makes BaTiO3‐BiMeO3 prospective in designing efficient and durable medium‐temperature solid oxide capacitor devices. This article is protected by copyright. All rights reserved

Diffusion and Defect Chemistry of Temperature-Stable BaTiO3-based Ceramics: Experiment and Theoretical Calculations

Dopants and oxygen vacancy migration mechanism in temperature-stable (Ba, Ca)TiO3-based ceramics

Colossal Dielectric Permittivity in (al+nb) Co-Doped Ba0.4Sr0.6TiO3 Ceramics

Defect mechanisms, oxygen vacancy trapping ability in rare‐earth doped BaTiO3 from first‐principles and thermodynamics

Effects Of Rare Earth Elements On The Dielectric Properties Of Batio3-Based X7r Materials

Effects of Rare Earth Elements on the Dielectric Properties of BaTiO<sub>3</sub>-Based X7R Materials

Defect Dipoles Induced High‐energy Storage Density in Mn‐doped BST Ceramics Prepared by Spark Plasma Sintering

Improving Energy Storage Performance of Barium Titanate-Based Ceramics by Doping MnO2

Study on Occupation Behavior of Y2O3 in X8R Nonreducible BaTiO3-Based Dielectric Ceramics

Study of the Defect Chemistry of Ca-Doped Batio3 Ceramics

Mechanism of oxygen vacancies migration in BaTiO3‐BiMeO3: experimental investigations and first principles studies

Doping Behaviors of Nb2O5 and Co2O3 in Temperature Stable BaTiO3-based Ceramics

Significantly Enhanced Dielectric Properties of BaTiO3-based Ceramics Via Synergetic Grain Size and Defect Engineering

Investigation of Coherent Interface on Relaxation Behavior and Reliability of Mg-doped BaTiO3 Dielectric Ceramics: Experiments and First-Principle Calculations

Core-shell structure strategy and oxygen vacancy engineering of 0.1LaMnO3@0.9(Ba0.5Sr0.5)TiO3 ceramics towards tuning electrical properties

Defect engineering in rare‐earth‐doped BaTiO 3 ceramics: Route to high‐temperature stability of colossal permittivity

Influence of Bao-Cao-Sio2 on Dielectric Properties and Reliability of Batio3-Based Ceramics

Significantly Enhanced Reliability in Defect-Engineered BaTi1-xMgxO3 Ceramics

Influence of Sintering Temperature on Core–shell Structure Evolution and Reliability in Dy Modified BaTiO3 Dielectric Ceramics

Compositional modulation and annealing treatment in BaTiO3 to simultaneously achieve colossal permittivity, low dielectric loss, and high thermal stability

Nb-doped BaTiO3-(Bi0.5Na0.5)TiO3ceramics with Core-Shell Structure for High-Temperature Dielectric Applications