Abstract:BaTiO3 powder synthesized by solid-state and hydrothermal method is the main dielectric material for multilayer ceramic capacitors (MLCCs). The microstructure of BaTiO3 is highly related to the synthesis process, which imposes significant influence on the dielectric and electrical performance of MLCCs. In this study, a systematic investigation was conducted to compare the properties of MLCCs fabricated with BaTiO3 prepared with solid-state (S-BaTiO3) and hydrothermal processes (H-BaTiO3), respectively. Both the S-BaTiO3 and H-BaTiO3 powders had an average grain size of 250 nm and exhibited a desired single perovskite phase with high tetragonality of 1.0100 and 1.0097. No apparent defects were detected in the S-BaTiO3, while lots of nano-pore defects (10-20 nm) were observed in the H-BaTiO3 powder. For their corresponding S-MLCC and H-MLCC, the characteristic DC dielectric breakdown strengths were 141.74 kV/mm and 135.94 kV/mm, and the initial insulation resistivities at 150°C with the electric field of 10 V/µm were 1.45 × 105 MΩ⋅cm and 1.34 × 105 MΩ⋅cm respectively. S-MLCC exhibited a better performance in the highly accelerated lifetime tests than H-MLCC. The better resistance degradation of S-MLCC was resulted from the lower concentration of Ti3+ ion and less Ni diffusion. Reduced defect concentration improved the activation energy of the grain and grain boundary in S-MLCC. All these results suggest that the solid-state BaTiO3 powder has a beneficial effect in enhancing the reliability of MLCCs.

Modeling of the Core-Shell Microstructure of Temperature-Stable Batio3 Based Dielectrics for Multilayer Ceramic Capacitors

High DC-Bias Stability and Reliability in BaTiO 3 -Based Multilayer Ceramic Capacitors: The Role of the Core-Shell Structure and the Electrode

High DC-Bias Stability and Reliability in BaTiO3-Based Multilayer Ceramic Capacitors: the Role of the Core-Shell Structure and the Electrode

Boosting Effective Capacitance of Nano-Grained Batio3-Based Ceramics Via a Precise Core-Shell Structure Optimization Strategy

Influence of Sintering Temperature on Core–shell Structure Evolution and Reliability in Dy Modified BaTiO3 Dielectric Ceramics

Microstructures and Dielectric Characteristics of Ultrafine-Grained Barium Titanate-Based Ceramics for Base-Metal-Electrode Multilayer Ceramic Capacitors Applications

Formation of Core‐Shell Structure in Ultrafine‐Grained BaTiO3‐Based Ceramics Through Nanodopant Method

Fabrication of Batio3-Based Dielectrics for Ultrathin-Layer Multilayer Ceramic Capacitor Application by A Modified Coating Approach

Grain Size Engineered High‐performance Nanograined BaTiO3‐based Ceramics: Experimental and Numerical Prediction

Core-shell structure in nanocrystalline modified BaTiO3 dielectric ceramics prepared by different sintering methods

The Grain Size Effect on Dielectric Properties of Batio3 Based Ceramics

Grain size engineered high‐performance nanograined BaTiO 3 ‐based ceramics: Experimental and numerical prediction

Microstructure Evolution and Dielectric Properties of Ultrafine Grained Batio3-Based Ceramics by Two-Step Sintering

Excellent permittivity-temperature stability and reliability performance of ultra-thin Ba<sub>0.97</sub>Ca<sub>0.03</sub>TiO<sub>3</sub>-based MLCCs

Preparation of Nano BaTiO3‐Based Ceramics for Multilayer Ceramic Capacitor Application by Chemical Coating Method

The effects of solid-state and hydrothermal synthesis methods of BaTiO3 on the reliability of multilayer ceramic capacitors

Dielectric Properties of Batio3-Based Ceramics Sintered in Reducing Atmospheres Prepared from Nano-Powders

Grain Size Effect on Electrical and Reliability Characteristics of Modified Fine-Grained BaTiO3 Ceramics for MLCCs

Electrical And Reliability Characteristics Of Mn-Doped Nano Batio3-Based Ceramics For Ultrathin Multilayer Ceramic Capacitor Application

Exceptional reliability of MLCCs enabled by defect-engineered BaTiO<sub>3</sub>

Dielectric Properties and Microstructures of Ta-doped BaTiO 3 –(bi 0.5 Na 0.5 )tio 3 Ceramics for X9R Applications