Abstract:The ultra-thin multilayer ceramics capacitors (MLCCs) with layer thickness less than 1 tm are in urgent demand due to the rapid development of modern electronic industries. However, the preparation of the dielectric materials with the desirable grain size <150 nm is a huge challenge. In this work, the ultra-fine BaTiO3 (BT) powders (<120 nm) prepared via solid-state reaction method, hydrothermal method and hydrothermal method following a heat treatment (850 degrees C) are selected to prepare the nano-crystalline non-reducible BT-based ceramics, respectively. The effect of the synthesis methods on the microstructure, electric performance and the reliability of the BT-based ceramics are studied. The results of the Raman, XPS and FT-IR spectroscopy demonstrate that a large number of internal stresses and point defects (hydroxyl/proton defects, Ba vacancies) are existed in the hydrothermal powders and can be eliminated to some extent by a proper heat treatment. Unfortunately, plenty of nano-pores (10-20 nm) are observed in the hydrothermal powders, which cannot be eliminated via the heat treatment or sintering process totally. As a result, the BT-based ceramic prepared by the solid-state powders has an absolute advantage in accelerating aging failure performance, compared to that prepared hydrothermal powders. The TSDC results indicate that the ceramic prepared by the solid-state powders has a lower oxygen vacancy concentration and a higher activation energy. Furthermore, a scaling analysis based on a RC equivalent model identifies the longer oxygen vacancy diffusion time for the ceramic prepared by the solid-state powders. All these features demonstrate that the solid-state ultra-fine BT powders are a promising candidate for the fabrication of the ultra-thin layer MLCCs. (C) 2020 Elsevier B.V. All rights reserved.

Grain Size Engineered High‐performance Nanograined BaTiO3‐based Ceramics: Experimental and Numerical Prediction

Grain size engineered high‐performance nanograined BaTiO 3 ‐based ceramics: Experimental and numerical prediction

Effect of Grain Size on Dielectric Properties and Reliability for Ultra-Thin MLCCs

Grain Size Effect on Electrical and Reliability Characteristics of Modified Fine-Grained BaTiO3 Ceramics for MLCCs

The Grain Size Effect on Dielectric Properties of Batio3 Based Ceramics

Significantly Enhanced Dielectric Properties of BaTiO3-based Ceramics Via Synergetic Grain Size and Defect Engineering

Preparation of Nano BaTiO3‐Based Ceramics for Multilayer Ceramic Capacitor Application by Chemical Coating Method

High-dielectric-constant Nanograin BaTiO3-based Ceramics for Ultra-Thin Layer Multilayer Ceramic Capacitors Via Grain Grading Engineering

Microstructures and Dielectric Characteristics of Ultrafine-Grained Barium Titanate-Based Ceramics for Base-Metal-Electrode Multilayer Ceramic Capacitors Applications

Enhanced energy storage performance in NBT-based MLCCs via cooperative optimization of polarization and grain alignment

Electrical And Reliability Characteristics Of Mn-Doped Nano Batio3-Based Ceramics For Ultrathin Multilayer Ceramic Capacitor Application

High Reliable Non-Reducible Ultra-Fine BaTiO3-based Ceramics Fabricated Via Solid-State Method

Boosting Effective Capacitance of Nano-Grained Batio3-Based Ceramics Via a Precise Core-Shell Structure Optimization Strategy

Preparation of Nano BaTiO3-Based Dielectric Ceramics by Different Sintering Methods

Dielectric Properties of Barium Titanate Based X7R Ceramics with Different Grain Sizes Mixed

High-performance energy-storage ferroelectric multilayer ceramic capacitor via nano-micro engineering

Ultra-high energy storage performance in lead-free multilayer ceramic capacitors <i>via</i> a multiscale optimization strategy

Ceramic Dielectrics for MLCCs

Fabrication of Batio3-Based Dielectrics for Ultrathin-Layer Multilayer Ceramic Capacitor Application by A Modified Coating Approach

Preparation of BME MLCC powders by aqueous chemical coating method

Effects of Processing on Microstructure and Dielectric Properties of Ultrafine- Grained Barium Titanate Based Ceramics for BME-MLCC Applications