Abstract:The ultra-thin multilayer ceramics capacitors (MLCCs) with layer thickness less than 1 tm are in urgent demand due to the rapid development of modern electronic industries. However, the preparation of the dielectric materials with the desirable grain size <150 nm is a huge challenge. In this work, the ultra-fine BaTiO3 (BT) powders (<120 nm) prepared via solid-state reaction method, hydrothermal method and hydrothermal method following a heat treatment (850 degrees C) are selected to prepare the nano-crystalline non-reducible BT-based ceramics, respectively. The effect of the synthesis methods on the microstructure, electric performance and the reliability of the BT-based ceramics are studied. The results of the Raman, XPS and FT-IR spectroscopy demonstrate that a large number of internal stresses and point defects (hydroxyl/proton defects, Ba vacancies) are existed in the hydrothermal powders and can be eliminated to some extent by a proper heat treatment. Unfortunately, plenty of nano-pores (10-20 nm) are observed in the hydrothermal powders, which cannot be eliminated via the heat treatment or sintering process totally. As a result, the BT-based ceramic prepared by the solid-state powders has an absolute advantage in accelerating aging failure performance, compared to that prepared hydrothermal powders. The TSDC results indicate that the ceramic prepared by the solid-state powders has a lower oxygen vacancy concentration and a higher activation energy. Furthermore, a scaling analysis based on a RC equivalent model identifies the longer oxygen vacancy diffusion time for the ceramic prepared by the solid-state powders. All these features demonstrate that the solid-state ultra-fine BT powders are a promising candidate for the fabrication of the ultra-thin layer MLCCs. (C) 2020 Elsevier B.V. All rights reserved.

Fabrication of Batio3-Based Dielectrics for Ultrathin-Layer Multilayer Ceramic Capacitor Application by A Modified Coating Approach

Preparation of Nano BaTiO3‐Based Ceramics for Multilayer Ceramic Capacitor Application by Chemical Coating Method

Preparation of BME MLCC powders by aqueous chemical coating method

Preparation of Nano BaTiO3-Based Dielectric Ceramics by Different Sintering Methods

Microstructure Evolution and Dielectric Properties of Ultrafine Grained Batio3-Based Ceramics by Two-Step Sintering

Simultaneous Enhancement of Dielectric Properties and Temperature Stability in BaTiO3‐based Ceramics Enabling X8R Multilayer Ceramic Capacitor

Microstructures and Dielectric Characteristics of Ultrafine-Grained Barium Titanate-Based Ceramics for Base-Metal-Electrode Multilayer Ceramic Capacitors Applications

Effect of Rare Earth Oxide Content on Nanograined Base Metal Electrode Multilayer Ceramic Capacitor Powder Prepared by Aqueous Chemical Coating Method

Electrical And Reliability Characteristics Of Mn-Doped Nano Batio3-Based Ceramics For Ultrathin Multilayer Ceramic Capacitor Application

The effects of solid-state and hydrothermal synthesis methods of BaTiO3 on the reliability of multilayer ceramic capacitors

The Grain Size Effect on Dielectric Properties of Batio3 Based Ceramics

Significantly Enhanced Dielectric Properties of BaTiO3-based Ceramics Via Synergetic Grain Size and Defect Engineering

Grain Size Engineered High‐performance Nanograined BaTiO3‐based Ceramics: Experimental and Numerical Prediction

Dielectric Properties of Batio3-Based Ceramics Sintered in Reducing Atmospheres Prepared from Nano-Powders

Coating of Crystalline BaTiO 3 Layer on Ni Nanoparticles for Multilayer Ceramic Capacitor Electrode

Fabrication of BaTiO 3 nanopowders with high tetragonality via two-step assisted rotary furnace calcination for MLCC applications

High Reliable Non-Reducible Ultra-Fine BaTiO3-based Ceramics Fabricated Via Solid-State Method

NANOCOMPOSITE DOPED BaTiO3-BASED ULTRAFINE DIELECTRICS FOR MULTILAYER CERAMIC CAPACITANCE

Uniform Coating of BaTiO3–Dy2O3–SiO2 Compound Nano Layer on Ni Particles for MLCC Electrode

Enhancement of Mechanical Properties of Multilayer Ceramic Capacitors through a BaTiO3/polydopamine Cover Layer

Boosting Effective Capacitance of Nano-Grained Batio3-Based Ceramics Via a Precise Core-Shell Structure Optimization Strategy